Pairing The Hrm Strap - Garmin HRM-Run Steps To Replace The Battery

1. Prior to wearing, wet the electrodes on the back of the HRM strap with water or electrolyte gel.
This will help establish an electrical connection between your body and the strap.
2. The HRM strap must be worn while pairing. Make sure the logo on the front of the strap is right-
side up, directly on the skin just beneath the breastbone as shown here:
3. Bring the HRM strap within 10 feet (3 meters) of the device you are pairing it with.
4. Attempt to add the HRM strap as a new sensor to the device. This is done from the device's
settings menu by selecting the option to search for all sensors. Refer to your
specific instructions.
5. If issues persist, consider replacing the CR2032 battery in the HRM if you have not done so
before
Owner's Manual for