Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Garmin HRM 200
Summary of Contents for Garmin HRM 200
- Page 1 HRM 200 Owner’s Manual...
- Page 2 © 2025 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com...
-
Page 3: Table Of Contents
Table of Contents Heart Rate Monitor Instructions..1 Pairing and Setup........1 Putting On the HRM 200......4 Device Information......5 Caring for the Strap......... 5 Replacing the Battery......5 Specifications.......... 6 Troubleshooting....... 7 Tips for Erratic Heart Rate Data..... 7 How do I check the battery level?.. -
Page 5: Heart Rate Monitor Instructions
When the HRM 200 is active and using a secure connection, the LED flashes (2 times) every 5 seconds. Open: The open connection type supports all Garmin devices that are compatible with heart rate monitors. ANT+ connections and some Bluetooth connections are open. The open connection type is also ®... - Page 6 Pairing the HRM 200 with Your Compatible Device You should pair the HRM 200 to your compatible device before you put it on. This allows you to easily see the LED and press the button. You can pair the HRM 200 to your compatible Garmin device, smartwatch, tablet, or fitness equipment (Connection Types and LED Behavior, page 1).
- Page 7 Pairing the HRM 200 with the Garmin Connect ™ You should pair the HRM 200 with the Garmin Connect app before you put it on. This allows you to easily see the LED and press the button. The Garmin Connect app allows you to customize settings and receive software updates.
-
Page 8: Putting On The Hrm 200
Putting On the HRM 200 1 Snap the module into the strap. NOTE: Both of the Garmin logos should be facing up. 2 Adjust the strap. 3 Wet the sensors. 4 Connect the strap hook on the right side of your body. -
Page 9: Device Information
• Do not store the heart rate monitor in direct sunlight or extreme temperatures. Replacing the Battery The HRM 200 strap has a tool for opening the battery cover. 1 Unsnap and remove the module. 2 Locate the size-adjustment slider on the HRM 200 strap. -
Page 10: Specifications
Water resistance: 3 ATM Operating temperature range: From 0° to 40°C (from 32° to 104°F) EU wireless frequency (power): 2.4 GHz @ 8 dBm maximum The device withstands pressure equivalent to a depth of 30 m. For more information, go to www.garmin.com/waterrating. Device Information... -
Page 11: Troubleshooting
Customizing the HRM 200 Settings in the Garmin Connect App You can customize the LED behavior so that it flashes whenever the HRM 200 is active. The LED default setting is to time out after 2 minutes in order to maximize battery life. -
Page 12: Status Led
3 Select an option: • Sync your compatible Garmin device with the Garmin Connect app. If an update is available, the connected device will prompt you to apply the update for your HRM 200 after your next activity. • Sync your HRM 200 with the Garmin Connect app. -
Page 13: Resetting The Device
Resetting the Device You can reset the HRM 200 to the factory default values. NOTE: Resetting the device clears all data and pairing. 1 Hold the button for 20 seconds. The LED flashes continuously, until the reset is complete. 2 Pair again (Pairing and Setup, page 1). - Page 14 January 2025 GUID-0051374C-9A59-48A9-9E6F-ED99E5B0EF39 v1...
Need help?
Do you have a question about the HRM 200 and is the answer not in the manual?
Questions and answers