Troubleshooting - ILD 9 ECO Manual

Troubleshooting

Problem
Smoke escapes to the room
Wood burning too quickly
Soot build-up on glass
Excessive soot build-up in chimney
The surface of the stove is
turning grey
Poor heating performance of stove
Odour or noise from stove
Cause
Fuel too wet
Closed air controls
Chimney draft insufficient,
dimensions, height diameter
or blockages
Vacuum in room
The air valves are set
incorrectly
The baffle plates are
incorrectly mounted or missing
Improper firewood
(waste wood, pallets etc.)
Chimney too large
Incorrect secondary airflow
setting
Excessive primary air
Fuel too wet
Wood pieces too large
Improper firewood
(waste wood, pallets etc.)
Chimney draft insufficient,
dimensions, height diameter
or blockages
Vacuum in room
Fuel too wet
The air valves are set
incorrectly
Overheating
Insufficient air flow
Incorrect fuel
Baffle plate position
Paint hardening
Material destressing
22
ENGLISH
Manual passage reference
See: Fuel
See: Primary/secondary
control
See: The chimney effect and
cleaning
See: Closed combustion
See: Primary/secondary
control
See: Installation
See: Fuel
See: The chimney effect
and cleaning
See: Fuel
See: Fuel
See: The chimney effect and
cleaning
See: Closed combustion
See: Fuel
See: Primary Secondary
control
See: Environment and
Primary/secondary control
See: Installation and cleaning
See: Fuel
See: Installation
See: First use
See: First use