Important Safeguards • Keep out of reach of children. Children should be supervised to ensure that they do not play with the appliance. When using electrical appliances, in order to reduce the risk of fire, electric • To disconnect, grip the plug and pull it from the wall outlet.
Always 11. Never immerse the product in water or any other liquid for any reasons. 1. Always position/install the heater in 12. Never use accessories that are not accordance with the instructions. recommended or supplied by the manufacturer. 2. Always make sure the electrical socket is accessible and located adjacent to, but not Positioning Instructions above the heater.
Page 4
Handling & Transit Cautions: Do not operate the appliance on an inclined • Unpack the heater from the carton it is surface. Do not move the appliance while the supplied in. appliance is switched on. • Prepare the heater for installation onto the In order to avoid a hazard due to inadvertent wall or insertion.
Page 5
Features of Your 127cm Flame Effect Inbuilt or Wall-mountable Electric Fireplace Master ON/OFF power switch Air Outlet Control panel Heating select 8 hour timer Color change button button select button LED display The temperature ON/OFF button Flame dimmer select button button Remote control Wall fixing...
Page 6
Your Electric Flame Wall-mount steps: Effect Heater 1. Although a minimum distance of 300mm from the floor is to be adhered to, for optimum viewing of the fuel bed, 600mm height is Congratulations on the purchase of your recommended. Select a location that is not new Heater.
Page 7
4. Fist Take off four screws in both sides and remove two screws at both front corner of fireplace. Figure (C) Fig A Remove the flat glass panel from the front of the enclosure. To remove, have firm grip on the glass 5.
Page 8
Recess the heater into a wall 4. Have two person to take the glass panel out of the fireplace box., Take the foam(A) out off Instructions & steps appliance.Place it to a soft and clean place. Figure(D) Note: This heater can be inserted into a wall, to do so your require a minimum of 150 mm depth.
Operation When operated for the first time, the unit may emit an unpleasant burning type smell. This is normal, and will disappear after a short period of use.Always choose a safe location for the heater, keeping in mind the safety precautions outlined.
Control Panel Heating select 8 hour timer Color change button button select button LED Display The temperature ON/OFF button Flame dimmer select button button • Select the desired function: Touch panel/Remote control Operation BUTTON FUNCTION ACTION&INDICATION ON: Enables control panel functions and 1.
Infrared Remote control Battery Replacing (For Remote Control) 6. Tell others about the risk associated with button batteries and how to keep their 1. The remote control requires one “CR2025” children safe. type 3-volt lithium battery (included). If the operation of the remote control becomes Thermal Safety Cut-out unsatisfactory, replace with a new 3-volt lithium battery.
This warranty is given by GSM Retail Group ABN: 53007682475 For Warranty and technical queries: 1300 373 199 Aus Or 0800 200 037 NZ Warranty Exclusions Damage to the base or diffuser or any part through accident, misuse or negligence. Cat. No. MIF1350TCL-RE December 2020...
Need help?
Do you have a question about the MIF1350TCL-RE and is the answer not in the manual?
Questions and answers