Important Safeguards • To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord. Do not use with wet hands or in damp environments. When using electrical appliances, in order to reduce the risk of fire, electric •...
Page 3
Always 11. Never immerse the product in water or any other liquid for any reasons. 1. Always position the heater in accordance 12. Never use accessories that are not with the instructions. recommended or supplied by the manufacturer. 2. Always make sure the electrical socket is accessible and located adjacent to, but not Position Instructions above the heater.
Page 4
Cautions: Control panel 1000W Heating Do not operate the appliance on an inclined select button surface. Do not move the appliance while the appliance is switched on. Dimmer 2000W Heating adjustable select button In order to avoid a hazard due to inadvertent Button resetting of the thermal cutout, this appliance must not be supplied through an external...
Page 5
Assembly Wall fixing bracket Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. Remove the heater and the feet from the carton, feet mounting screws are contained in the satchel with the Instruction Manual. When using heater as a portable appliance than the feet (Supplied separately in carton) must first be fitted.
Page 6
Wall-mount Instructions wall studs ensure to secure bracket to at least 2 wall studs (Additional pilot hole may need to be drilled into bracket to obtain alignment This Flame Effect Electric Fireplace also comes with 2 studs). In this instance there is no need with a wall mounting kit if the preferred option is to drill holes to insert wall plugs,but can to wall mount the heater.
Control Panel Remote control 1000W heating select button Dimmer 2000W heating adjustable button select button Power ON/OFF switch 1000W heating select button 2000W heating select button Dimmer adjustable button Power ON/OFF Switch 1. Power ON/OFF Switch: Press the power switch once to switch On power, push the power switch button once again to turn main power 1.
Operation Thermal Safety Cut-out When operated for the first time, the unit may This appliance is fitted with a safety cut out, emit an unpleasant burning type smell. This is which will operate if the heater overheats (eg, normal, and will disappear after a short period due to blocked air outlet).
Care and Cleaning Disposal • Before cleaning, ensure that the heater is Do not dispose of packaging or the product switched in the off position and is unplugged through your household waste! from the socket. The product and packaging are made from •...
Warranty Conditions for purchase in Australia & New Zealand Any claim under this warranty must be made within 2 years of the date of purchase of the product. To make a claim under the warranty in Australia, take the product (with proof of purchase) to any Bunnings store (see www.bunnings.com.au in Australia or www.bunnings.co.nz in New Zealand for store locations).
Need help?
Do you have a question about the MF850UBY21 and is the answer not in the manual?
Questions and answers