Summary of Contents for LIBERTY AV SOLUTIONS DigitaLinx DL-USB-PTZ10-W
Page 1
Full HD PTZ Camera Quick Guide DL-USB-PTZ10-W 11675 Ridgeline Drive Phone: 719-260-0061 Colorado Springs, CO Toll-Free: 800-530-8998 V 1.0 Fax: 719-260-0075...
DL-USB-PTZ10-W Quick Guide Product Overview Liberty’s DigitaLinx USB PTZ10 Cameras are available in two different color options: black or white. Both camera options share the same features and are designed to capture video for conferencing and other applications such as streaming, webinars, distance learning, lecture capture, and personal chatting. Easy plug-and-play;...
Page 3
DL-USB-PTZ10-W Quick Guide Product Breakdown Bottom View Front View Rear View 1. Camera Lens 6. RS232 Control Interface (Input) 2. Remote Control Receiving Indicator 7. RS232 Control Interface (Output) 3. Camera Base 8. RS485 Input (left +, right-) 4. Tripod Screw Hole 9.
DL-USB-PTZ10-W Quick Guide Mounting Options Wall mounting the camera using the provided wall mount or third party mount. Included Items: STEP 1 STEP 2 STEP 3 STEP 4 FINISHED...
Page 5
DL-USB-PTZ10-W Quick Guide *Optional Ceiling Mount Included Items: STEP 1 STEP 2 STEP 3 STEP 4 FINISH...
Page 6
DL-USB-PTZ10-W Quick Guide Setting Up Your PTZ Camera Power-on Connect the extenral power supply to the camera. USB 2.0 cable The provided USB 2.0 cable can provide power in addition to sending video. If the USB signal needs to be extended, this feature may be lost and the external power supply may be needed in supplying sufficient power to the camera.
DL-USB-PTZ10-W Quick Guide Maintenance and Troubleshooting Camera Maintenance • Power off the camera and disconnect the power adapter and socket, if it’s not used for a long period of time. • Use a soft cloth or tissue to clean the camera cover. •...
Page 8
DL-USB-PTZ10-W Quick Guide Control Interface Pin-Outs RS-232 Interface Connection to PC or Camera Controller Camera WindowsDB-9 1. DTR 1. DCD 2. DSR 2. RXD 3. TXD 3. TXD 4. GND 4. DTR 5. RXD 5. GND 6. GND 6. DSR 7.
Page 9
DL-USB-PTZ10-W Quick Guide Control Interface Pin-Outs RS232(DB9) Port Port Definition Data Carrier Detect Receive Data Transmit Data Data Terminal Ready System Ground Data Set Ready Request to Send Clear to Send Ring Indicator VISCA Cascading Cameras Camera 1 Camera 2 1.
DL-USB-PTZ10-W Quick Guide Using the Remote Control In this quick start guide, “press the key” means a click rather than a long-press, and a special note will be given if a long-press for more than one second is required. When a key-combination is required, do it in sequence. For example, “[*] + [#] + [F1]”...
Page 11
DL-USB-PTZ10-W Quick Guide Zoom Control Press [Zoom +] key to zoom in. Press [Zoom -] key to zoom out. Press and hold the keys. The action of focus will keep continue and stop as soon as the key is released. Set and Clear Presets Set Preset: Press [SET PRESET] button, and then press the number key 0-9 to set preset positions.
Page 12
DL-USB-PTZ10-W Quick Guide Camera Remote Control Address Setting [*] + [#] + [F1]:Camera Address No.1 [*] +[#] + [F2]:Camera Address No. 2 [*] + [#] + [F3]:Camera Address No. 3 [*] + [#] + [F4]:Camera Address No. 4 Menu Settings [MENU]: Open / close the OSD menu [HOME]: Camera lens back to the middle position;...
Page 13
DL-USB-PTZ10-W Quick Guide System Setting Move the pointer to the (Setup) in the Main Menu, click the [HOME] key and enter into the (System Setting) as shown below. Protocol: VISCA/Pelco-P/Pelco-D/Auto Visca Address: VISCA=1~7 Pelco-P=1~255 SETUP Pelco-D=1~255 ============================= Baudrate: 2400/4800/9600/115200 Protocol Auto Visca Address Fix: On/Off Visca Address...
Page 14
DL-USB-PTZ10-W Quick Guide Exposure Setting Move the pointer to the (EXPOSURE) in the Main Menu, click the [HOME] key, and enter into the (Exposure sub menu) as shown below. Mode: Auto, Manual, Shutter priority, Iris priority and Brightness priority. EXPOSURE EV: On/Off (only available in auto mode) ============================= Compensation Level: -7~7 (only available in auto...
Page 15
DL-USB-PTZ10-W Quick Guide Image Move the pointer to the (IMAGE) in the Menu, click the [HOME], and enter into the (IMAGE sub menu) as follow, Brightness: 0~14 Contrast: 0~14 IMAGE ============================= Sharpness: 0~15 Brightness Flip-H: On/Off Contrast Flip-V: On/Off Sharpness B&W Mode: color, black/white Flip-H Gamma: Default/0.45/0.50/0.5/0.63...
Page 16
DL-USB-PTZ10-W Quick Guide Focus Move the pointer to the (FOCUS) in the Menu, click the [HOME], and enter the (FOCUS) as follows. Focus Mode: Auto/manual AF-Zone: Up/middle/down FOCUS AF-Sensitivity: High/middle/low ============================= Focus Mode Auto AF-Zone AF-Sensitivity ] Select [ ] Change Value [Menu] Back Noise Reduction Move the pointer to the (NOISE REDUCTION) in the Menu, click the [HOME], and enter the (NOISE...
Page 17
DL-USB-PTZ10-W Quick Guide P/T/Z Move the pointer to the (P/T/Z) in the Main Menu, click the [HOME], and enter the (P/T/Z) as follows. Depth of Field: Only effective for the remote controller, On/ Off; (when zooming in, the PT control speed by P/T/Z remoter will become slow) =============================...
Page 18
DL-USB-PTZ10-W Quick Guide Serial Port Communication and Control The camera can be controlled using a RS232/RS485 interface; RS232C serial parameters are as follows: • Baud rate: 2400/4800/9600/115200 bits / sec • Start bit: 1 data bits • Stop bit: 1 •...
Page 25
DL-USB-PTZ10-W Quick Guide Command Command Packet Return Packet Note CAM_VersionInq 8x 09 00 02 FF y0 50 ab cd ab cd : vender ID ( 0220 ) mn pq rs tu vw FF mn pq : model ID ST ( 0510 ), U2( 0512 ), U3 ( 0513 ) rs tu : ARM Version vw : reserve...
Page 26
DL-USB-PTZ10-W Quick Guide Pelco-D Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 0xFF Address 0x00 0x08 Pan Speed Tilt Speed Down 0xFF Address 0x00 0x10 Pan Speed Tilt Speed Left 0xFF Address 0x00 0x04 Pan Speed Tilt Speed Right 0xFF Address...
Page 27
DL-USB-PTZ10-W Quick Guide Pelco-P Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 0xA0 Address 0x00 0x08 Pan Speed Tilt Speed 0xAF Down 0xA0 Address 0x00 0x10 Pan Speed Tilt Speed 0xAF Left 0xA0 Address 0x00 0x04 Pan Speed Tilt Speed 0xAF...
Page 29
DL-USB-PTZ10-W Quick Guide Technical Specifications Continued USB Feature Operation Systems Windows 7, Windows8, Windows10, Mac osx, Linux, etc Video Compression MJPG/H264/H265 Format USB Communication Protocol PTZ Parameter Pan Rotation -170°~+170° Tilt Rotation -30°~+30° Pan Control Speed 0.1 ~60°/sec Tilt Control Speed 0.1~40°/sec Preset Speed Pan: 60°/sec, Tilt: 40°/sec...
DL-USB-PTZ10-W Quick Guide Product Dimensions Measurements are in millimeters.
Page 32
DL-USB-PTZ10-W Quick Guide Thank you for your purchase. For Technical Support please call our toll-free number at 800-530-8998 or email us at supportlibav@libav.com www.libav.com D I G I T A L I N X I S A B R A N D O F : 11675 Ridgeline Drive, Colorado Springs, Colorado 80921 USA Phone: 719-260-0061 Fax: 719-260-0075 Toll-Free: 800-530-8998...
Need help?
Do you have a question about the DigitaLinx DL-USB-PTZ10-W and is the answer not in the manual?
Questions and answers