Advertisement
Step 3: Update the TV software
1. Switch-off the TV and unplugging power cord.
2. Connect the USB flash drive (containing the software update) to the USB connector on the TV.
3. Press and hold the "OK" button on the remote control. Do not release the "OK" button on the remote
control; switch on the TV by plugging in power cord or using the power switch on the TV.
4. Release the OK button once the LED starts blinking. LED blinking indicates that the software upgrade is in
process.
5. TV start-up by itself upon successful software upgrade.
6. Proceed again to normal installation. Use the Installation Manual xxHFL2809D or the Installation Manual
xxHFL2819D based on your TV model as a guide for your installation.
2
Advertisement
