Gaming Headset - Asus Xonar Xense Quick Start Manual

Front panel audio header
5
Connect one end of the front panel audio cable to the front panel audio header on
the audio card, with the other end to the chassis-mounted front panel audio I/O
module.
Aux Input Header
6
This 4-pin header usually connects to the Analog Audio output of the TV tuner card
or other sound source inside your computer. To monitor your TV tuner card's audio
from this Aux-In, you must enable the "monitor" function for Aux-In in the Xonar
Xense Audio Center's recording mixer.
S/PDIF Header
7
Connects to supported graphics card.
Power connector
8
Connects to the power cable of your power supply unit.
PCI Bus golden fingers
9
Connects to the PCI Express slot on your motherboard.

Gaming headset

Microphone boom arm
1
Allows you to move your headset's microphone comfortably close to your mouth.
Volume control and mute box
2
Allows you to increase/decrease the volume of your headset's audio output and to
put it on mute mode.
6.3mm connectors
3
Connects your headset to the audio card's Mic In/Line-In and Headphone Out ports.
4
2
1
ASUS Xonar Xense Quick Start Guide
3