Related Manuals for Infrapower PPS-02-S
Summary of Contents for Infrapower PPS-02-S
- Page 1 Inspired by Your Data Center User Manual PPS-02-S, IP dongle GUI & SNMP InfraPower Intelligent PDU 1-Phase 1-Phase 3-Phase Dual Feed Designed and manufactured by Austin Hughes UM-PPS-02-S-Q421V1 www.austin-hughes.com...
- Page 2 ■ Re-position or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. UM-PPS-02-S-Q421V1 www.austin-hughes.com...
-
Page 3: Table Of Contents
Content P. 1 < 1.1 > IP Dongle GUI PPS-02-S Key Features < 1.2 > IP Dongle Installation & Meter ( PDU ) Cascade P. 2 < 1.3 > Meter ( PDU ) Level Setting P. 3 P. 4 < 1.4 > IP Dongle Confi guration P. -
Page 4: Ip Dongle Gui Pps-02-S Key Features
< 1.1 > IP Dongle GUI PPS-02-S Key Features InfraPower Manager PPS-02-S is a FREE built-in GUI of each IP dongle ( IPD-02-S only ) to remotely monitor the con- nected PDUs ( max. up to 16 PDU levels ) -
Page 5: Ip Dongle Installation & Meter ( Pdu ) Cascade
Cat 5 / 6 cable Up to 20M Up to 20M TH 1 TH 2 To LINK port of next PDU ( Up to 16 levels ) 1st level 2nd level 3rd level PDU meter PDU meter PDU meter UM-PPS-02-S-Q421V1 www.austin-hughes.com... -
Page 6: Meter ( Pdu ) Level Setting
Step 3 - In display 9.1, Press the & button to select PDU level no. & press to confi rm Step 4 - Press to exit ( II ) For 2.8″ LCD Meter ( With touchscreen function ) UM-PPS-02-S-Q421V1 www.austin-hughes.com... -
Page 7: Ip Dongle Confi Guration
Step 10. Change the desired “ IP address ” / “ Subnet mask ” / “ Gateway ”, then Click “ Save ” to confi rm the changes The default IP setting is as below: IP address : 192.168.0.1 Subnet mask : 255.255.255.0 Gateway : 192.168.0.254 UM-PPS-02-S-Q421V1 www.austin-hughes.com... -
Page 8: Pps-02-Sip Dongle Gui
< 1.5 > PPS-02-S IP Dongle GUI Each IP dongle ( IPD-02-S ) provides a FREE built-in GUI , PPS-02-S, which allows user, via a web browser, to see PDU’s data and remotely manage the PDU over a TCP / IP Ethernet network. - Page 9 < 1.5 > PPS-02-S IP Dongle GUI In < Details >, - Change “ Name ” and “ Location ” of PDU & Click “ Apply ” - Change “ Alarm amp. ” & “ Low alert amp. ” of PDU’s circuits & Click “ Apply ”...
- Page 10 < 1.5 > PPS-02-S IP Dongle GUI In < Outlet setting >, - Change PDU’s outlet name - Change “ Power up sequence delay ” of PDU’s outlet ( Switched PDU only ) - Change “ Alarm amp. ”, “ Rising Alert amp.” & “ Low alert amp. ” of PDU’s outlet ( Outlet Measurement PDU only ) Click “...
- Page 11 < 1.5 > PPS-02-S IP Dongle GUI In < Sensor Status >, - View status, location, latest reading & alarm setting of Temp. & Humid sensors. - View status & location of Door sensor & Smoke sensor The GUI will not show the status / reading if sensors are NOT installed & activated.
- Page 12 < 1.5 > PPS-02-S IP Dongle GUI In < System >, - Change IP dongle name & location - Change temperature unit displayed in UI - Change IP dongle’s IP address, subnet mask & gateway. ( For static IP setting only ) - Select “...
-
Page 13: Snmp Setup
Step 3. Enter the confi gured IP Dongle address into the I.E. address bar. Default IP address is “ 192.168.0.1 “ Step 4. Enter “ Login name “ & “ Password “. Default login name & password are “ 00000000 “ UM-PPS-02-S-Q421V1 www.austin-hughes.com P.10... - Page 14 Step 16. Input “ Trap Station IP “ , “ Trap Port “ & “ Trap Community “ of Station 1 Step 17. Repeat Step 14 & 15 for Station 2 & 3 Step 18. Click “ Apply “ to fi nish the SNMP v1 / v2 settings UM-PPS-02-S-Q421V1 www.austin-hughes.com P.11...
- Page 15 Step 4. Enter “ Login name “ & “ Password “. Default login name & password are “ 00000000 “ Step 5. Select SNMP from the left navigation pane Step 6. The SNMP Settings window appears as below: UM-PPS-02-S-Q421V1 www.austin-hughes.com P.12...
- Page 16 Step 21. Input the “ Trap Station IP “ & “ Trap port “ Step 22. Repeat step 12 to 20 for User 2 & 3 Step 23. Click “ Apply “ to fi nish the SNMP v3 settings. UM-PPS-02-S-Q421V1 www.austin-hughes.com P.13...
- Page 17 After enable SNMP, you can click “ SNMP Traps “ to go to the “ SNMP Traps Setting “ page Below is the default setting for each PDU SNMP trap. You can set the SNMP trap option and Click “ Apply “ to fi nish the settings. UM-PPS-02-S-Q421V1 www.austin-hughes.com P.14...
-
Page 18: Ip Dongle Firmware Upgrade
Default IP address is “ 192.168.0.1 “ Step 6. Enter “ Login name “ & “ Password “. Default login name & password are “ 00000000 “ Step 7. Select the Firmware from the left navigation pane UM-PPS-02-S-Q421V1 www.austin-hughes.com P.15... - Page 19 Click “ Open ” Step 10. Click “ Upgrade ” to start the upgrade process. It takes a few minutes to complete. Step 11. Once complete, UI will return to the login page. UM-PPS-02-S-Q421V1 www.austin-hughes.com P.16...
-
Page 20: Dhcp Setting
Step 4. Enter the “ Login name “ & “ Password “ . Default login name & password are “ 00000000 “ Step 5. Select “ System “ from the left navigation pane Step 6. Select “ ON “ from “ DHCP “ & click “ Apply “ to save the settings UM-PPS-02-S-Q421V1 www.austin-hughes.com P.17... - Page 21 < 1.8 > DHCP Setting Step 7. Select “ Firmware “ from the left navigation pane Step 8. Record the “ Device MAC address “ Step 9. Assign an IP address to the IP Dongle from your DHCP server. Complete UM-PPS-02-S-Q421V1 www.austin-hughes.com P.18...
-
Page 22: Command Line Interface Access
WEBUI to search the connected PDU & confi gure the SNMP settings before you disable WEBUI via command line interface. Login settings - Change login name - Change login password - Reset to default login name & password UM-PPS-02-S-Q421V1 www.austin-hughes.com P.19... - Page 23 UM-PPS-02-S-Q421V1 www.austin-hughes.com P.20...
- Page 24 The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2021 Austin Hughes Electronics Ltd. All rights reserved. UM-PPS-02-S-Q421V1 www.austin-hughes.com P.21...
Need help?
Do you have a question about the PPS-02-S and is the answer not in the manual?
Questions and answers