Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Echomaster SSM-RBP
Summary of Contents for Echomaster SSM-RBP
- Page 1 Parking Sensor System with Buzzer or Display User Manual...
-
Page 2: Box Contents
Disclaimer: EchoMaster® is strictly a driver assistance device, and should not be relied upon as a substitute for safe driving practices. Use common sense when parking and always follow recommended safe driving guidelines from your local, State and County Department of Motor Vehicles regarding parking procedures. -
Page 3: Fitting Instructions
Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display Fitting Instructions The sensors should ideally be equally spaced along the bumper. For best results we recommend that the outer sensors are spaced between 8-13cm from the edge of the bumper. -
Page 4: Wiring Diagrams
Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display Wiring Diagrams Please reference the following wiring diagrams & information for various installation SSM-RBP SSM-DIS Red - Red - Connect to a +12V switched ignition supply. Connect to a +12V switched ignition Black - supply. - Page 5 Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display SSM-RBP Rear Operation (No Turn Off Delay) Front Operation (Using footbrake with buzzer) (Red) Reverse (Red) (Black) (Black) Not Used (Blue) Not Used (Blue) Not Used (White) Not Used...
- Page 6 Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display SSM-DIS Front Operation (Using Speed Pulse) Rear Operation (With Display) (Red) (Red) (Black) (Black) Override Switch Override Switch (Blue) (Blue) Not Used (White) Speed (White) Not Used (Yellow)
-
Page 7: Dip Switches
Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display Setting Up Dip switches The dip switches should be set as follows: Dip switch 1 This determines whether the kit is being used in front or rear mode. -
Page 8: Operation
Sensor C Fault Sensor D Fault Rear Application For rear applications, SSM-DIS or SSM-RBP can be used. When reverse is engaged, the system will beep once to notify the driver it is on and working. When an object is within range, the driver will be alerted via audible and/or visual alert (if using the display). - Page 9 Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display Front Application For front applications, SSM-DIS must be used. This system is fully automatic. It is on when the vehicle ignition is on. It is active when the vehicle is below the set speed and is in standby mode when the vehicle is above the set speed.
-
Page 10: Specification
Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display Specification SSM-RBP / SSM-DIS Operating Voltage Range 10.5 - 16V DC Rated Voltage 12-24V DC Rated Current 30-280mA Operating Temperature -30 - +70C Waterproof Grade (Sensors & Module) - Page 11 Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast) email - support@aampglobal.com (US) email - technical.eu@aampglobal.com (Europe)
- Page 12 Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast) email - support@aampglobal.com (US) email - technical.eu@aampglobal.com (Europe)
- Page 13 Installation Guide SSM-RBP / SSM-DIS Parking Sensor System with Buzzer or Display tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast) email - support@aampglobal.com (US) email - technical.eu@aampglobal.com (Europe)
- Page 14 15500 Lightwave Drive, Suite 202, Clearwater, Florida 33760 Woolmer Way, Bordon, Hampshire, United Kingdom email - support@aampglobal.com (US) tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast) email - technical.eu@aampglobal.com (Europe) EchoMaster is a Power Brand of AAMP Global. EchoMaster.com SSM-RBP / SSM-DIS_v2060318...