Advertisement
Quick Start Guide
1.
Turning On the Accent for the first time:
a. Press and hold the On/Off button located on the lower left side of the device. The
screen will appear in about 45 seconds.
b. Wait for the NuVoice software to load. This will take about 45 seconds.
c. Review the NuVoice Software Agreement and select "I Agree."
d. Next the Exploration Wizard will load.
2.
Once the Exploration Wizard loads check the battery status next to the Battery icon
the upper right portion of the screen. If the device is not fully charged, locate the charging port
and connect to the battery charger.
Note: The device can be used while charging.
3.
Exploration Wizard
a. Use the Wizard for Target Practice and Picture Test exercises or
b. Select one of the vocabulary options.
c. If the desired vocabulary does not appear on the Wizard follow the Quick Start steps for
changing or replacing vocabularies.
d. To return to the Wizard from a vocabulary screen follow the Quick Start steps for
changing vocabularies.
4.
Changing vocabulary
a. Select the Tool icon
b. Select the Toolbox icon
• Hint: Tapping the Home icon
c. Open the User Area Menu.
d. Select Switch User Area.
e. Select the desired vocabulary and wait for it to load.
• Note: If the desired vocabulary is not available in the Switch User Area, refer to
the instructions for replacing vocabularies.
f. Tap OK twice to return to vocabulary screen.
2
in the upper right corner of the screen.
from the menu that appears on the left side of the screen.
twice will open the Toolbox
ACCENT 700 / 700-SB
in
PRC • 800-262-1984
Advertisement
