Key Digital KD-X3x1WUTx Operating Instructions Manual
3x1 4k/18g 328 ft. (100m) hdbaset transmitter wall plate with auto switching, hdmi, display port and vga inputs, usb 2.0, lan, cec control keypad, audio de-embed, ir and rs-232 pass-thru, ip control, power over hdbaset kd-app and kdplug & present ready
Single gang hdmi usb-c over 50m cat5e/6 wall plate switcher transmitter. 4k/uhd, 18g, power over cat, auto switching. (5 pages)
Summary of Contents for Key Digital KD-X3x1WUTx
Page 1
KD-X3x1WUTx 3x1 4K/18G 328 ft. (100m) HDBaseT Transmitter Wall Plate with Auto Switching, HDMI, Display Port and VGA Inputs, USB 2.0, LAN, CEC Control Keypad, Audio De-Embed, IR and RS-232 Pass-Thru, IP Control, Power over HDBaseT. KD-App and KDPlug & Present Ready.
CAT5e/6 cable . In addition to AV signals, KD-X3x1WUTx extends USB 2 .0, IR, RS-232 for controlling remotely located equipment . The wall-plate unit fits in a standard US three-gang box and is powered by the Rx unit or...
Page 3
™ KDPlug & Present Ready: Add KD-CX800 to build a programming-free automation system ™ › Ease of Integration: Complete configuration using Key Digital Management Software ™ › HDCP Licensing: Fully licensed and compatible with HDCP 2 .2 › HDR10 and Dolby Vision: More life-like images through a greater range of luminance levels ›...
Rx unit / presentation switcher, or connect to the analog audio de-embed port of the wall plate 7. Connect control system or PC to LAN port of the KD-X3x1WUTx or the Rx for network connectivity 8. Connected monitors are controlled by CEC Manager on the HDMI connection .
Integration Options Integration with KD-X100MRx Receiver: WiFi Router WiFi KD-X3x1WUTx K E Y D I G I TA L APP READY KD-X100MRx KD-CAMUSB DSP/Mixer KD-AMP220 KD-AMP220 Line Bass Treble Mute Input Control Amplifier...
Page 6
Integration with KD-UPS52U: AppleTV PC (DisplayPort) Signage (USB-C) Cable/Satellite WiFi Router WiFi K E Y D I G I TA L APP READY KD-X3x1WUTx Presentation Switcher KD-PS42 with KD-AMP220 DSP/Mixer KD-UPS52U KD-AMP220 KD-X100MRx KD-AMP220 Line Bass Treble Mute Input Control...
Page 7
KDMS Pro Download ™ 1. Connect to KD-X3x1WUTx from your PC using the USB micro port on the face of the unit 2. Open KDMS Pro software and perform a USB Device scan (fig . 1a-1b) ™...
Page 8
7. If using KD-App or KDMS for control, set the desired Input/Output names by entering the Input/ Output Settings section of the properties window, and selecting the Change Input/Output Name button (fig . 3a), selecting the desired input/output and entering the name (fig . 3b) 8.
Page 9
Connect and configure KD- X3x1WUTx as described in this Quick Setup Guide . » Download and open KD-App and/or KDMS » Ensure the iOS device and/or PC computer are on the same network with KD-X3x1WUTx » Perform a network scan in the KD-App/KDMS »...
Page 10
Option 3: Control via professional control system KD-X3x1WUTx allows control over TCP/IP interface for bi-directional communication . You may connect to the LAN port of the KD-X3x1WUTx, KD-X100MRx, or KD-UPS52U to deliver network connectivity to the Key Digital devices .
Connections, Buttons, and LEDs Front Connections and LEDs HDMI Input: Using an HDMI cable, connect your HDMI sources . › Supports up to UHD/4K @ 50/60 fps [4:4:4], 18Gbps » See Supported Standard 4K Video Formats table below » Supports HDR10 and Dolby Vision »...
Page 12
Provides 5V 500mA power » Use USB toggle switch to determine if KD-X3x1WUTx will be used to connect a USB host (USB-B » port) or USB device (USB-A port) . Both host and device are not simultaneously possible .
Page 13
Reset Pin › Push and hold for approximately 10 seconds to restore all settings » to default . Front LEDs will turn off and restore during bootup process to indicate the reset has completed . EDID Rotary › EDID authentication is provided from the unit to the connected »...
Page 14
Used for configuration and control from PC via KDMS Pro, KDMS, or » third-party control terminal Used for firmware updates (consult with Key Digital tech support » before updating firmware) Supports USB driver for Windows 10, 7, XP, Mac, Linux »...
Page 15
Must connect with KD-UPS52U, KD-X100MRx, or KD-PS42 » Has been verified some third-party HDBaseT Rx / projectors . » Contact Key Digital Technical Support for more information . Power over HDBaseT from Rx » Analog L/R Audio Output: Connect to audio system .
Supports baud rate up to 115,200bps » KD-X3x1WUTx is not controllable via RS-232 » TCP/IP Commands KD-X3x1WUTx allows bi-directional control over TCP/IP connection made at KD-X3x1WUTx, KD-UPS52U, or KD-X100MRx . Default static IP address is 192.168.1.239, port 23 › Notes: Commands are not case-sensitive »...
Page 17
-- SPC DF00 : Reset to Factory Defaults without Network Reset ------------------------------------------------------------------------- Status Command (STA). Returns unit status and settings in readable format: ------------------------------------------------------------------------- Key Digital Systems STATUS ------------------------------------------------------------------------- -- Model: KD-X3x1WUTx, Device Name: X3x1WUTx_0001 -- Main F/W Ver: 1.02, CEC Ver: 1.05...
Damage to the power supply or power plug » Exposure to rain or moisture » Power Supply Use: You MUST use the Power Supply PROVIDED with your unit or you VOID the Key Digital Warranty ® and risk damage to your unit and associated equipment. Warranty Information...
Need help?
Do you have a question about the KD-X3x1WUTx and is the answer not in the manual?
Questions and answers