Weekly Timer Operation - Mitsubishi Electric MSZ-LN18VGW Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
E.g. : Runs at 24°C from waking up to leaving home, and runs at 27°C from
getting home to going to bed on weekdays.
Runs at 27°C from waking up late to going bed early on weekends.
Setting1 Setting2
Mon
ON
24°C
Fri
6:00 8:30
Setting1
Sat
ON
Sun
8:00
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
EN
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
Press to enter the weekly timer setting mode.
2
Press and
Pressing selects the day of
the week to be set.
* All days can be selected.
EN-13
Setting3
OFF ON
27°C
17:30
27°C
* blinks.
to select setting day and number
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing
the setting number.
3
Press
temperature.
Setting4
OFF
22:00
Setting2
OFF Pressing
ON/OFF timer.
21:00
Pressing
timer setting.
* Hold down the button to change the time quickly.
Press
other days and/or numbers.
4
Press
setting.
Note:
• Press
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
after all the settings are complete. All the weekly timer settings will be saved.
• Press
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
.
1
Press
*
2
Press
day or number.
selects
Press
Note:
When all days of the week are selected to view the settings and a different set-
ting is included among them,
, , and to set ON/OFF, time, and
selects
Pressing
adjusts the time.
deletes
and to continue setting the timer for
to complete and transmit the weekly timer
to transmit the setting information of weekly timer to the indoor
to enter the weekly timer setting mode, and press and hold
to turn the weekly timer ON. (
again to turn the weekly timer OFF. (
to enter the weekly timer setting mode.
blinks.
or to view the setting of the particular
to exit the weekly timer setting.
will be displayed.
E.g. : [ON], [6:00]
and [24°C] are
selected.
Pressing
adjusts the tem-
perature.
* which was blink-
ing goes out, and the
current time will be
displayed.
once
lights.)