Advertisement
CLEANING & MAINTENANCE
CLEANING YOUR COOLER
How to clean your cooler:
• Unplug the cooler and remove anything inside.
• Wash the inside of the unit with a solution made of warm water and neutral
detergent. Do not use abrasive cleaners.
• Use mild, soapy water to clean the unit's door seal.
• To ensure efficient operation, also thoroughly clean the back and bottom of
the beverage cooler.
• To clean the outside of the unit, use a mild detergent and warm water.
DEFROSTING YOUR COOLER
To prevent ice buildup on the inside of the beverage cooler, it may be
necessary to defrost occasionally:
1. Turn the temperature control to #4 or #5.
2. Wait 30 to 60 minutes.
3. Turn control knob back to #1 or #2.
If you notice an excess of frost buildup inside the unit, take these steps to
remove it:
1. Unplug the beverage cooler.
2. Allow frost to melt from the inside of the cooler. If necessary, use a
plastic utensil to scrape ice from the interior surface.
3. Dry thoroughly before plugging it in again.
MOVING YOUR COOLER
To move your cooler:
• Remove anything stored inside.
• Securely tape down all loose parts located inside the unit.
• Turn the leveling feet up to the base in order to avoid damage.
• Tape the door shut.
• Be sure the cooler stays in an upright position during transportation.
8
newair.com
Advertisement
