Basket Heights; Before Using For The First Time; Performing The Initial Configura- Tion - Siemens SN43HI88CS User Manual

Table of Contents

Advertisement

en Before using for the first time
To stop the stemware falling out,
make sure the stemware basket
cannot tip over.
→ "Arrange tableware", Page 31
Unloading stemware basket
Note: Observe the information on
how to unload tableware.
→ "Removing tableware", Page 32
Take the stemware basket by the
1.
handle out of the bottom basket.
Pull up the rotating fixing arms
2.
and turn anticlockwise

Basket heights

Set the baskets at the right height.
Appliance height 81.5 cm with cutlery drawer
Setting
1 max. ø
2 max. ø
3 max. ø

Before using for the first time

Before using for the
first time
Configure the settings for initial start-
Before using for the first time
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect quick start",
Page 37
24
3.
⁠ .
Top basket
16 cm
18.5 cm
21 cm
Requirement: "The appliance has
been installed and connected."
→ Page 13
1.
2.
3.
4.
5.
Tip: You can change these settings
and other "Basic settings"
→ Page 35 at any time.
Take the stemware out of the
stemware basket
Bottom basket
31 cm
27.5 cm
25 cm
"Add special salt." → Page 25
"Add rinse aid." → Page 27
"Switch on the appliance."
→ Page 32
"Setting the water softening sys-
tem." → Page 25
"Set the amount of rinse aid to be
dispensed." → Page 28
⁠ .

Advertisement

Table of Contents
loading

Table of Contents