Connecting To A Standard Antenna - Sony VGX-TP20E User Manual

Connecting to a standard antenna

You can connect your computer to an indoor/outdoor antenna system, using Option 1 or Option 2 from the previous section,
Connecting to standard cable access (CATV)
connection may require a VHF/UHF RF combiner/transformer (not supplied) to connect the computer and the indoor/outdoor
antenna system.
✍
If you are connecting to an indoor/outdoor antenna, you may need to reorient the antenna for best reception. Move the antenna cable away from other
power sources or connectors to reduce signal interference.
To connect in land-based (terrestrial) broadcasting mode (Option 1)
1 Connect one end of a TV coaxial cable (1) (not supplied) to your antenna outlet (2). Connect the other end to a VHF/UHF
RF combiner/transformer (3) (not supplied).
2 Connect a coaxial cable feed connector (4) (not supplied) to the VHF/UHF RF combiner/transformer (3).
3 Connect one end of another TV coaxial cable (5) (supplied with selected models only) to the feed connector (4). Connect
the other end to the VHF/UHF input port (6) on the computer.
(page 47). Depending on the type of antenna system in your home, your
n 49 N
Using Your VAIO Computer