Download Print this page

Norcon Communications TTU-1X Series Quick Start Manual page 2

2-way talk-thru electronic communication system
Hide thumbs Also See for TTU-1X Series:

Advertisement

TROUBLESHOOTING:
You may occasionally encounter a problem with your TTU® system. If
this happens, refer to the trouble shooting list. If additional help is
needed, please contact us.
No sound at all
Is the power cable properly connected to power supply and
the power supply plugged into a working outlet?
The power cable red wire should be connected to (+) and black wire
connected to (-) the power supply. The power supply should has been
has been plugged into a working outlet.
Howling ( Feedback)
Is the TALK or LISTEN volume turned too high?
Set the volume control to a proper level. In most cases, both TALK and
LISTEN controls should be set to the position of around 11 to 12o'clock.
Conversation cutting-off and breaking-up
Is the TALK volume setting too high?
Turn down TALK volume to a proper level. Make sure the green LED is
off when not talking to the gooseneck microphone.
Is the attendant talking too far from the gooseneck
microphone?
The idea distance is 3" to 4" from the gooseneck microphone.
TTU®-1 DX does not work when operated by internal battery.
Are the batteries fully charged?
If the unit is newly installed, allow the batteries to be charged for 10-12
Hrs. before operating. The unit can be used while the batteries are
being charged.
Is the battery charger plugged into a working outlet?
If the battery charger is plugged into a working outlet, and the batteries
are being charged, the battery charger should be warm, if it is not; the
battery charger may be defective.
7
12

Advertisement

loading