Acer X1130P Service Manual page 5

1.0 Optical Performance
1.1 ANSI Brightness
1.2 Brightness Uniformity
1.2.1 ANSI Uniformity
1.2.2 JBMA Uniformity
1.2.3 Upper-Down
unbalance
1.2.4 Left-Right
unbalance
1.3 Contrast Ratio
1.3.1 ANSI Contrast
1.3.2 FOFO Contrast
without APM
1.3.3 FOFO Contrast with
APM
1.4 Light Leakage
1.4.1 Light Leakage in
Active Area
1.4.2 Light Leakage out of
Active Area
(Except DMD Defect)
1.5 Color
1.5.1 White
1.5.2 Red
1.5.3 Green
1.5.4 Blue
1.6 Color Uniformity
1.6.1 White
1.6.2 Red
1.6.3 Green
1.6.4 Blue
1.7 Color Gamut
2.0 Image Quality
2.1 Throw Ratio
2.2 Zoom Ratio (tolerance
applied)
2.3 Distortion
2.3.1 Keystone Distortion
2.3.2 Vertical TV
Distortion
2.4 Projection Offset
2.5 Focus Range
2.5.1 Visible Range
Tested under 60" (diagonal) image size with Wide
projection lens position unless other specified.
X1130P/X1130PA/X1230P
X1230PK/X1230PA : Minimum 1840 Lumens
X1237 Minimum 2400 Lumens
Minimum 55%
Minimum 75%
0.5~2
0.6~1.67
Minimum 150:1
X1130P/X1130PA/ X1230P/
X1230PK/X1230PA : Minimum 1100:1
X1130P/X1130PA/ X1230P/
X1230PK/X1230PA : Minimum 1200:1
<0.5 lux compared to center point within 60" (Diagonal at
2.3m, Wide) image size. Note: This light leakage in Active
area is only described as the spot light with obvious shape.
It is not included the uniformity difference of the projector for
black pattern.
<0.5 lux with 60"~80"(Diagonal at 2.3m, Wide) image size
X
0.314±0.04
0.647±0.04
0.344±0.04
0.139±0.03
X
0.040
0.040
0.040
0.040
Typ 60% compare NTSC
52.5"±3% Diagonal at 2m, Wide
1.1±2%
<1.0%
<1.0%
120% ±5%
1~8 m
5
: Minimum 2000 Lumens
X1237: Minimum 1600:1
X1237: Minimum 2100:1
Y
0.377±0.04
0.341±0.04
0.587±0.04
0.090±0.03
Y
0.040
0.040
0.040
0.040