Use; Control Panel; Operation - Cuisinart CPK18AR Instructions Manual

3 . USE

ACTUAL SIZE SAMPLE
Before using for the first time we recommend operating the
kettle 2 or 3 times . Fill to the MAX mark fill level (1 .7L), bring
to the boil and when boiling has finished and the kettle has
switched off, discard the water and rinse out the inside .
A. Control panel
pad print color: black
Text size:: 2.8mm(h)
75°C
85°C
On/Off Switch
95°C
Temperature selector: 6 temperatures (75°C, 80°C,
85°C, 90°C, 95°C and 100°C) .
Keep Warm Button
temperature for approx . 25~30 minutes .
Cover release button
8
85°C 90°C
95°C 100°C
75°C 80°C
85°C 90°C
95°C 100°C
32mm
32mm
75°C 80°C
80°C
85°C 90°C
90°C
95°C 100°C
: used to turn the kettle on and off .
100°C
: maintains the water
: to open the cover .
CONTINENTAL CONAIR LIMITED
CUISINART-E
Customer:
Model No. CPK18E
B. Operation
Control panel pad print
Description:
Peter 12/20/13
Prepared by:
Checked by:
Heating water
Approved by:
Released on:
CONTINENTAL CONAIR LIMITED
• Open the cover by pressing the button
Donlim
Vendor:
Customer: CUISINART-E
• Pour the desired amount of cold water in the kettle
CPK18E
Model No.
ensuring to keep between the "MIN" and "MAX" levels
Description: Control panel pad print
Prepared by: Peter 12/20/13
marked on the water gauge .
Checked by:
cm 1 2 3
Approved by: • Push the lid closed; you will feel and hear a slight «click» .
Scale 1 : 1
Released on:
• Gently place the kettle on the base .
Donlim
Vendor:
• Plug the kettle into the mains .
• Press the button of the desired temperature .
cm 1 2 3 4 5
• Press the button
Scale 1 : 1
button selected will flash . The water level indicator at the
rear of the kettle will turn on . An audio signal will sound for
1 second to indicate that the process has begun .
N.B. If the
been set, the kettle will default to 100°C .
• When the kettle has reached the selected temperature it
will beep 5 times and switch off . The light illuminating the
water indicator window will turn off .
• The kettle can also be turned off at any time by pressing
the button or by removing it from the base .
N .B . The temperature can be changed at any time during the
boiling process by pressing one of the preset temperature
options . If the temperature selected during boiling is lower
than the temperature of the water in the kettle or the kettle
is off and the water is still hotter than the temperature
selected, the temperature button will flash, and the kettle
will switch off and beep 5 times once the water temperature
drop to the selected temperature . If the temperature
selected during boiling is same as the temperature of the
water in the kettle, it will switch off and beep 5 times . When
the kettle is off, select a temperature and then press On/Off
switch, if the temperature of the water in the kettle is the
4 5
to heat the water . The temperature
switch is pressed but the temperature has not
.