Instructions for Use
Before using for the first time we recommend operating the kettle 2 or 3 times. This will
remove any dust or residue remaining from its manufacture. Fill to the MAX mark fill
level (1.7L), bring to the boil and when boiling has finished and the kettle has switched
off, discard the water and rinse out the inside.
A
Control Panel
On/Off button
1.
Used to turn the kettle on and off.
button
2.
Used to increase the temperature in increments of 5 degrees from 85ºC through to 100ºC.
3. 85ºC button
Temperature setting for coffee and variety of teas (refer to quick reference guide on page
10).
4. 100ºC button
Temperature setting for boiling water for a variety of teas (refer to quick reference guide
on page 10).
5. Digital display window (LCD)
Displays current water temperature at all times. LCD back light is activated when the
kettle boils, and remains on for 10min after boiling has ended.
8