Samsung AGTN1DKH Series Installation Manual page 4

Safety Information
• Make sure that there are no other products or objects
under the fan coil unit.
– Water falling from the product may cause fire or
property damage.
• Electric work must be performed by a qualified
electrician in accordance with the with the "local
regulations" and "code" and this installation manual.
– If the capacity of the power supply circuit is
insufficient or the electrical work is performed
incorrectly, it may cause electric shock or fire.
• For the power supply of the fan coil unit, use a dedicated
power supply line of the rated power or more.
In addition, do not extend the power cable arbitrarily.
– If the connection is incomplete, it may cause fire.
• Be sure to arrange the electrical wires so that the
structure of the electric device including the cover is
not lifted, and secure the cover firmly.
– If the cover is installed incorrectly, it may cause the
terminal parts to overheat, leading to electric shock
or fire.
• For the parts and tools used in installation, be sure to
use the supplied accessories and the specified parts
an tools.
– Failure to use the supplied accessories and the
specified parts may cause product malfunction,
water leakage, electric shock, or fire.
• After the installation, be sure to check for water
leakage.
– After finishing the installation work, check that
there is no water leakage. If water leaks contact
with a fan, heater, or stove, etc., it may cause fire or
property damage.
• Make sure that you earth the cables.
– Do not connect the earth wire to the gas pipe, water
pipe, lighting rod, or telephone wire. Incomplete
earthing may cause electric shock or fire.
• Perform the installation work according to this
installation manual.
– Incomplete installation may cause water leakage,
electric shock, or fire.
4
English
• After completing the installation, check the following
before operating the product:
– The piping is connected correctly and securely, and
there is no water leakage.
• Do not modify and extend the power cable. Avoid
complicated wirings.
– Failure to do so may cause connection defect,
insulation defect, or overcurrent, leading to electric
shock or fire.
– If you need to extend the power cable because it
is damaged, follow "Extending the power cable" in
this installation manual.
• Before performing electrical wirings for the fan coil
unit, be sure to disconnect the main power
– Failure to do so may cause electric shock.
• Depending on the installation location, an earth
leakage breaker must be installed.
– Failure to do so may cause electric shock.
• Do not modify the product arbitrarily.
– Failure to do so may cause product malfunction,
electric shock, fire, or personal injury.
• When the fan coil unit is fixed inside the ceiling, be
careful that the power cable, water pipes, and electric
parts are not subject to water or external impact.
• Be sure to connect the power cable to an auxiliary
circuit breaker (ELCB, ELB, MCCB) dedicated to the fan
coil unit.
– If a dedicated auxiliary circuit breaker (ELCB, ELB,
MCCB) is not installed, the power supply may not
be cut off in case of over current or current leakage,
leading to electric shock or fire.
• Make sure that the wiring is securely connected using
the specified wires, and securely fix the wires so that
no external force from them is applied to the terminal
connection part.
– Incomplete connection or fixation may cause heat
or fire.
• Be careful that the room power supply is not out of
the voltage range (minimum voltage to maximum
voltage).
– Failure to do so may cause damage to electrical
parts or degradation to part performance, leading
to product malfunction.
After installing the fan coil unit
• After completing the installation, be sure to check for
leakage from the water pipes.