Advertisement
Available languages
Available languages
Operation
Cooling & carbonisation unit display
You will only get optimal
sparkling water at 4°C to 5°C.
The higher the temperature, the
less sparkling your soda water
will be!
Not available at
the moment
Normal operating mode with
remaining capacity for CO₂ and
fi lter displayed (in %). The left-hand
fi gure shows the remaining capacity
of the fi lter. The right-hand fi gure
shows the remaining capacity of
the CO₂ cylinder.
After confi rming with 'OK', the
current temperature is displayed
and can be set between 4°C and
10°C using the arrow buttons.
Please note: the appliance takes a
little time to reach the set tempera-
ture.
After confi rming with 'OK', the
appliance displays the connectivity
mode for connecting with an app:
"CON OFF" = connectivity module
inactive; "CON ON" = connectivity
module active. Use the arrow buttons
to change the mode and confi rm by
pressing 'OK'.
To reset to factory settings, hold
the OK button down for 3 seconds.
Please note: this will also reset the
timer for cleaning. This may lead to
hygiene issues. As such, cleaning
is recommended after performing a
reset.
To start calibration, hold the 'OK'
button down for 3 seconds. The
calibration routine will then start
automatically and you can reset the
dispensing volume (see p. 51). The
scaling wheel on the mixer tap
must not be set to „0" when
starting the calibration process.
45
Advertisement
Chapters
