BC9000 User Manual Thank you for choosing our Bluetooth handsfree products. Please read this BC9000 User Manual before you use this handsfree carkit. Flaircomm Technologies Inc. (hereinafter referred to as “The company”) reserves its rights to make any changes and improvements to the product described in this document without prior notice.
BC9000 User Manual Certification and Safety Approvals This product has been tested and found to comply with Bluetooth BQB requirements, part 15 of FCC rules, R&TTE Directive(99/5/EC) of CE marked requirements, and approval on Bluetooth models of China Wireless Communications Committee.
BC9000 User Manual Contents: BLUETOOTH HANDSFREE CARKIT .....................1 USER MANUAL ............................1 MODEL: BC9000 ............................1 DECLARATION:............................2 NOTICE:................................2 SAFETY:................................2 CERTIFICATION AND SAFETY APPROVALS..................3 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT......3 RF EXPOSURE WARNING:........................3 CE COMMAND: ............................3 ETSI EN 301 489-1 V1.6.1(2005-09); ......................3 ETSI EN 301 489-17 V1.2.1(2002-08);......................3 ETSI EN 300 328 V1.7.1(2006-10);.......................3...
Page 5
BC9000 User Manual ..............16 RGINATE SYNCHRONIZATION FROM LUETOOTH CARKIT ..................16 RIGINATE SYNCHRONIZATION FROM PHONE ..........................16 ELETE PHONEBOOK CALL FUNCTIONS ...........................17 .............................17 AKE A CALL ..........................17 ECEIVE A CALL BC9000 ....................17 SE THE WHILE ON A CALL ............................18 ND A CALL ............................18...
BC9000 User Manual 1. Introduction 1.1 Bluetooth technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments, such as mobile phone, PDA, PC, headset, mouse, keyboard, printer, etc. can wirelessly communicate with each other via Bluetooth connection.
Page 7
BC9000 User Manual Music line-in cable (Jack cable) SW upgrade cable (MiniUSB to USB convert cable) Mounting accessories (Screws, double side adhesive tape, etc.) User manual...
BC9000 User Manual 2. Before you begin 2.1 Check the car configuration The cables supplied with the kit feature ISO connectors and two pairs of line-out jacks. The line-out jacks can be used if your audio system features this option (use of an amplifier). Several set-ups are therefore possible depending on the type of car stereo and your vehicle.
1. Under the dashboard or at any other place in the car using the installation screws. 2. Under the dashboard or at any other place in the car using the double-sided adhesive tape. The BC9000 system is fitted with 4 interfaces: ISO cable connector...
BC9000 User Manual We recommend installing all the cables before fixing the control box. Each cable supplied has a different connector to avoid wrong connections. The box must not be installed near the heating or the air-conditioning. Ensure that it is not exposed to sunlight.
BC9000 User Manual 3.2.2 Connect in-car radio with «line in» inputs 1. Use this type of connection by wiring the line-out (brown & whit wire or red & black wire) to your car stereo’s line-in. 2. Using the two pairs of line-out will enable you to take advantage of the music function in stereo over your vehicle’s speakers.
BC9000 User Manual 3.3 Install the power supply cable The red wire of the power cable must be connected to the permanent 12V, the orange wire to the 12V and the black wire to the earth. Verify the electric wiring of the ISO supply bundle of the in-car radio. In some vehicles it is necessary to reverse the positions of the red and orange wires.
BC9000 User Manual Make sure the microphone is installed as close to the mouth of the user as possible. The ideal distance is 60 cm. The best possible location for the microphone is near the rear-view mirror. The microphone needs to be pointed towards the user Make sure the microphone is not exposed to the air stream for air vents.
4. Select BC9000 in the device list on your mobile phone. 5. Enter passkey “0000”and confirm to pair the carkit with your phone Once your phone is paired to the BC9000, the BC9000 will connect your phone automatically. 4.3.2 Disconnect your phone with Bluetooth carkit...
BC9000 User Manual 4.3.3 Connect an already used phone with Bluetooth carkit If you want to connect BC9000 to another phone you already paired: 1. Click the jog wheel to select Bluetooth, you will see a list of paired phones.
BC9000 User Manual 5. Synchronize the phonebook 5.1 Automatic synchronization Automatic synchronization from two top priority phones after carkit powered on and connected with them. Automatic synchronization from the phone after pairing and connected with it. Note: The carkit can store 4 phones’ phonebook. The maximum contact number of each phonebook is 1000.
6.1 Make a call If the contact you want to call is in the phonebook of the phone connected to the BC9000: 1. Click the jog wheel and select Phonebook > Select, you can see the list of the phone name.
BC9000 User Manual Transfer a call to/from your phone: During a call, if you want to continue the conversation on your phone, click the . The call is transferred to the phone. If you want to transfer the call from your phone to carkit, click the .
BC9000 User Manual 7. Voice recognition To handle a call via voice recognition commands, voice control must be activated in the menu settings. 7.1 Activate/Deactivate the voice control 1. Click the jog wheel and select Phones > Settings > Voice control 2.
8.1 Music player connected via line-in cable If you are using the BC9000 with a music player, you can connect your music player to the BC9000 by using the line-in cable. The audio will be output by audio speakers in the car.
Compared with the ordinary Bluetooth handsfree device in the market which can only connect to one single phone at one time, BC9000 allows you to connect two paired phones simultaneously. Thus, this is very convenient for users with two phones.
10. Settings 10.1 Phonebook You can configure the BC9000 to decide whether to add a prefix to call ID while receiving a call from a foreign country. To do so: Click the jog wheel and select Phones > Settings > Phonebook > Prefix > Off. No prefix is added.
BC9000 User Manual 10.6 Display 10.6.1 Brightness To adjust the display brightness of the carkit: Click the jog wheel and select Phones > Settings > Display > Brightness Use the jog wheel to adjust the display brightness of the carkit.
BC9000 User Manual 10.9 Security To change the PIN of paired phone, you can: Click the jog wheel and select Phones > Settings > Security Use the jog wheel to input PIN by the soft keypad. 10.10 Factory settings To restore the settings of the carkit to the factory settings: Click the jog wheel and select Phones >...
. 2. Format your USB disk in FAT or FAT32 format. 3. Copy the software to your USB disk and rename as bc9000.img. Make sure that the USB disk has only one partition and only has bc9000.img on this partition.