Summary of Contents for Flaircomm Technologies BLUETONE BTHF102
Page 1
BTHF102/202 Declaration: Without written permission from Flaircomm Technologies Inc., reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited。 The company reserves rights to make any changes and improvements to the product described in this...
BlueTone BTHF102/202 User Manual Notice : Please make sure your mobile phone and network operator supports the functions described in this manual, otherwise the relative functions can not be realized on this Handsfree device. Certification and Safety Approvals This product has been tested and found to comply with Bluetooth BQB requirements, part 15 of FCC rules, R&TTE Directive(99/5/EC)...
Page 3
BlueTone BTHF102/202 User Manual Safety Check the laws and regulations on the use of mobile phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions require.
BlueTone BTHF102/202 User Manual 1. Introduction 1.1 Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipment, such as mobile phone, PDA、PC, headset, mouse, keyboard, printer, etc. can wirelessly communicate with each other via Bluetooth connection. To ensure worldwide compatibility, Bluetooth operates on the globally available ISM (Industrial Scientific and Medical) frequency band.
BlueTone BTHF102/202 User Manual 1.6 Key Press Duration Definitions Short press (SP): press and release a button quickly. Long press (LP): press and hold a button for at least 3 seconds, then release. Very long press (VP): press and hold a button for at least 6 seconds, then release.
BlueTone BTHF102/202 User Manual 2. Using Your Handsfree 2.1 Battery Charging and Usage 2.1.1 Battery Charging This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging time is around 2-3 hours. Detailed charging procedures as follows: 1.
BlueTone BTHF102/202 User Manual Hole Stanchion Double-side Sticker Figure 4 Back of the device Figure 5 fixing the mounting dock Fixing BlueTone BTHF202 (referring to Figure 6): 1. Plug the part 1 to the inlet, then tear the paper off the Double-side Sticker, paste the mounting dock on the right place on the vehicle.
BlueTone BTHF102/202 User Manual Turn off the Handsfree: Long press K1, you will hear 2 power-down tones, and All LEDs are off. This indicates the handsfree is power off. 2.4 Pairing/Connecting your Handsfree with Bluetooth Equipment 2.4.1 Pairing your Handsfree with Bluetooth handset Before making and answering calls, you must pair your handsfree and phone.
BlueTone BTHF102/202 User Manual 2.4.3 Erase all paired profiles This handsfree can paired with up to 8 Bluetooth equipments. When Handsfree in the Paring Mode, long press K4, it will erase all paired profiles and quit pairing mode. At this time, Blue LED gives 1 blink per 3 seconds. 2.4.4 Connecting/Disconnecting your Handsfree with Bluetooth Equipment When working with a bluetooth equipment using HFP, your handsfree cannot communicate with the equipment without bluetooth connection established in advance.
BlueTone BTHF102/202 User Manual 2.5.3 Mute You can mute or un-mute an ongoing call by simultaneously quick pressing K3 and K4. 2.5.4 Transferring Calls to/from Your Handset Transferring calls to your handset: long press K2, Blue LED gives 1 blink per 3 seconds. Transferring calls from your handset: short press K2, Blue LED gives 1 blink per 3 seconds.
BlueTone BTHF102/202 User Manual 3. Quick User Guide 3.1 LED patterns LED Pattern 1: Blue LED gives 1 blink per 3 seconds; Red LED is off. LED Pattern 2: Blue LED gives 3 quick blinks per 2 seconds; Red LED is off. LED Pattern 3: Blue and Red LEDs alternate continuously.
Page 14
BlueTone BTHF102/202 User Manual Table 2: Pairing/Connections FUNCTION CURRENT STATUS OPERATION HEADSET INDICATOR HANDSET AUDIO TONE LED INDICATOR Enter Power Off Very long press K1 2 power-up tones, LED Pattern 3 pairing and then 1 pairing mode tone Erase all Paring Mode Long press K4 LED Pattern 1...
Page 15
BlueTone BTHF102/202 User Manual Table 4: Transfer Functions FUNCTION CURRENT STATUS OPERATION HEADSET INDICATOR HANDSET AUDIO TONE LED INDICATOR Call Talk Talk Long press K2 Key Tone LED Pattern 1 Transfer (handsfree to handset) Call Talk Talk Short press K2 Key Tone LED Pattern 2 Transfer...
BlueTone BTHF102/202 User Manual 4. Maintenance BlueTone BTHF102/202 are well-designed communications devices, careful maintenance and proper use will extend the product life and keep their elite performance in delivering voice. Following maintenance procedures may be helpful to you: Always turn off power and keep your device in a safe place when it is not in use Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids which may corrode electronic circuits.
BlueTone BTHF102/202 User Manual 5. Important Messages and Frequently Asked Questions 1. Except handsets, what kind of devices can the handsfree communicate with: Besides pairing with a handset for receiving and making phone calls, the handsfree can also communicate with PDA and computer that equipped with Bluetooth.