RDT FloodMaster RS-090-E Manual

Washing Machine Leak Detection &
Automatic Water Shut-Off Outlet Box System
Congratulations on your purchase of a Reliance Detection RS-090-E washing machine leak
detection system. This product is designed to automatically shut off the water supply to the
washing machine if a water leak is detected. To ensure proper installation and to maximize the
performance of your RS-090-E water leak detection system, please read this manual thoroughly
before installing or operating the system.
PLEASE READ CAREFULLY BEFORE PROCEEDING:
If a leak is detected, the RS-090-E will shut off the water going to the washing machine. This
will stop the continuous flow of water from the water supply valves, but all or some of the water
that is already in the washing machine and hoses may still leak out onto the floor.
Complies with ASME A112.18/CSA B125.1-2012; NSF 372.
NOTE: The RS-090-E can be installed on existing or new washing machine installations.
Follow all applicable Federal, State and Local codes for installation. Valve(s) must be under
appropriate water pressure for performance testing.
www.RelianceDetection.com
RS-090-E System Components (included in kit):
1 – Leak detection receiver
1 – Water sensor with 8' lead wire
1 – Metal plate for sensor placement
1 – Power transformer with 7' lead wire
RS-090-E
1 – Outlet box with mounting straps (4)
1 – Outlet box trim plate
2 – Water hammer arrestors
Toll-Free: 888-771-4929