Acer P7203B Series User Manual page 17

# Icon Function
Laser button
(#)
11
12 Enter
13 Four directional
select keys
14 KEYSTONE
15 MENU
MOUSE Left/
16
Right Click
17 Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower
18 VOLUME
19 PAGE
20 Prev
21 Next
22 Play/Pause
23 Stop
24 VGA
25 S-VIDEO
26 COMPONENT
27 VIDEO
SD/USB A
28
29 USB B
30 HDMI™/DVI
31 LAN/WiFi
32 KeyPad 0~9
Note: "#" Japan area is not supported.
Description
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
Press "ENTER" to play media file.
Use up, down, left, right buttons to select items or make
adjustments to your selection.
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
Left-/right-click buttons are on the left and right,
respectively; the center button works as a multidirectional
pointer stick. To enable this function, an USB cable must be
connected to projector from your PC.
Management.
Increases/decreases the volume.
For computer mode only. Use this button to select the next
or previous page. This function is only available when
connected to a computer via a USB cable.
Press "Prev" to go to previous index or page in file list view.
Press "Next" to go to next index or page in file list view.
Press "Play/Pause" to play/pause media file.
Press "Stop" to stop playing media file.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
To change source to S-Video.
Press "COMPONENT" to change source to Component
video. This connection supports YPbPr (480p/576p/720p/
1080i) and YCbCr (480i/576i).
To change source to COMPOSITE VIDEO.
Press "SD/USB A" to change source to USB A. (no SD
function)
Press "USB B" to change source to USB B.
Press "HDMI™/DVI" to change source to HDMI™/DVI.
Press "LAN/WiFi" to display the image which is wire or
wirelessly transmitted from the PC to the projector via the
"Acer eProjection Management" utility.
Press "0~9" to input a password in the "Security".
7