Table of Contents
Advertisement
pivCLASS Bundles
Bundles consist of two (2) pivCLASS readers and one (1) pivCLASS Authentication Module (PAM). You must be a pivCLASS Certified Reseller to purchase these
bundles. To obtain the desired bundle part number first determine the individual pivCLASS reader part number and then insert a "B" in front of the Base Part Number
as shown below. First year maintenance and support is mandatory with every PAM and must be purchased separately (not included with Bundle purchase).
Description
Qty 2 x
Qty 1 x
pivCLASS R40-H OR
pivCLASS Authentication Module
pivCLASS RP40-H
(Model: M2000)
Contactless Smart Card Reader:
Authentication module hardware,
Finished Reader, Wall Switch
firmware and installation guides.
Includes PAM with plastic enclosure
and mounting plate.
Qty 2 x
Qty 1 x
pivCLASS RKCL40-P OR
pivCLASS Authentication Module
pivCLASS RPKCL40-P
(Model: M2000)
Contactless and Contact Smart
Authentication module hardware,
Card Reader: Finished Reader,
firmware and installation guides.
Wall Switch, Key Pad, LCD
Includes PAM with plastic enclosure
US Double-Gang Size
and mounting plate.
125 kHz Prox Interpreters
1
Order P for standard format support = HID Prox, AWID, EM4102 and Indala (10022 – 26-bit).
All pivCLASS readers support high frequency 13.56 MHz technology.
Controller Communications
2
R = Default option. Supports both Wiegand out and full duplex (FDX) RS485. Reconfigurable in field from Wiegand to RS485 using a programming card. FDX required for use with PAM.
P = Supports both Wiegand out and half duplex (HDX) RS485 with OSDP v1 protocol. Reconfigurable in field from Wiegand to RS485 using a programming card. HDX is not supported by PAM.
Factory configuration option for Wiegand mode is determined by the "Specific Configuration Settings", see note 4 below.
iCLASS Security Options (Factory or Field Configurable)
3
0 = Standard Security (Version 1) Keyset – compatible with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
E = Elite, reads only SE Elite
credentials with unique matching keys – compatible with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with matching Elite keys. Line item
TM
on PO requires ICE reference number.
Specific Configuration Settings
4
Identifies all firmware configurations including Wiegand output settings, PAM and OSDP mode settings and audio/visual settings (e.g., default setting): buzzer on, LED normally red, flashes green on read, buffer one key, no
parity, 4 bit message. Use the pivCLASS, iCLASS SE, multiCLASS Configuration Guide located on the HID Global PIV & FIPS 201 Solutions web page (https://www.hidglobal.com/government/piv) to obtain the complete
reader part number.
May 2013
Base
125 kHz
13.56 MHz
Part No.
Interpreters
Interpreters
1
N = Without Prox
H
B920
P = With Prox
(contactless)
(Std)
P
N = Without Prox
(contact +
B923
P = With Prox
contactless)
(Std)
© 2012-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
pivCLASS How to Order Guide – D00456, A.4
Part Number
Controller
Controller
Product
Hardware
Communications
Version
2
Connection
P = RS485 HDX
N = Pigtail
R = RS485 FDX
T = Terminal
E
(See note 2)
Strip
P = RS485 HDX
N = Pigtail
R = RS485 FDX
T = Terminal
E
(See note 2)
Strip
Specific
Color
Security
Configuration
3
Settings
4
0 =
K = Black
Standard
XXXX
G = Gray
E = Elite
0 =
K = Black
Standard
XXXX
E = Elite
Page 5 of 11
Advertisement
Table of Contents
