Table of Contents
Advertisement
pivCLASS How to Order Guide – D00456, A.4
pivCLASS Readers
Obtaining individual pivCLASS reader part numbers requires the use of the online pivCLASS Reader Configurator. You do not need to be pivCLASS certified to resell
pivCLASS readers.
Description
pivCLASS R10 & RP10
Mini-Mullion Contactless Reader
pivCLASS R15 & RP15
Mullion Contactless Reader
pivCLASS R40 & RP40
Wall Switch Contactless Reader
pivCLASS RK40 & RPK40
Wall Switch Contactless Keypad Reader Keypad
pivCLASS RKCL40 & RPKCL40
Wall Switch Contact/Contactless Keypad Reader
with LCD display
pivCLASS RKCLB40 & RPKCLB40
Wall Switch Contact/Contactless Keypad Reader
with LCD display and Biometric sensor
125 kHz Prox Interpreters
1
Order P for standard format support = HID Prox, AWID, EM4102 and Indala (10022 – 26-bit).
All pivCLASS readers support high frequency 13.56 MHz technology.
Controller Communications
2
R = Default option. Supports both Wiegand out and full duplex (FDX) RS-485. Reconfigurable in field from Wiegand to RS485 using a programming card. FDX required for use with PAM.
P = Supports both Wiegand out and half duplex (HDX) RS485 with OSDP v1 protocol. Reconfigurable in field from Wiegand to RS485 using a programming card. HDX is not supported by PAM.
Factory configuration option for Wiegand mode is determined by the "Specific Configuration Settings". See note 4 below.
iCLASS
Security Options (Factory or Field Configurable)
3
®
0 = Standard Security (Version 1) Keyset – compatible with iCLASS SE
E = Elite, reads only SE Elite
credentials with unique matching keys – compatible with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with matching Elite keys. Line item
TM
on PO requires ICE reference number.
Specific Configuration Settings
4
Identifies all firmware configurations including Wiegand output settings, PAM and OSDP mode settings and audio/visual settings (e.g., default setting): buzzer on, LED normally red, flashes green on read, buffer one key, no
parity, 4 bit message. Use the pivCLASS, iCLASS SE, multiCLASS Configuration Guide located on the HID Global PIV & FIPS 201 Solutions web page (https://www.hidglobal.com/government/piv) to obtain the complete
reader part number.
Page 4 of 11
Base
125 kHz
13.56 MHz
Part No.
Interpreters
Interpreters
1
900
910
N = Without Prox
H
P = With Prox (Std)
(contactless)
920
921
923
P
N = Without Prox
(contact +
P = With Prox (Std)
contactless)
924
, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
®
© 2007-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Part Number
Controller
Controller
Product
Hardware
Communications
Version
2
Connection
P = RS485 HDX
N = Pigtail
R = RS485 FDX
E
T = Terminal Strip
(See note 2)
P = RS485 HDX
N = Pigtail
R = RS485 FDX
E
T = Terminal Strip
(See note 2)
Specific
Color
Security
Configuration
3
Settings
4
K = Black
0 = Standard
XXXX
G = Gray
E = Elite
0 = Standard
K = Black
XXXX
E = Elite
May 2013
Advertisement
Table of Contents
