Waterproof Measures; Install Network Cable Waterproof Jacket - HIKVISION DS-2CV2021G2-IDW Quick Start Manual

Network Bullet Camera·Quick Start Guide

Waterproof Measures

If the camera is installed outdoor, you should use the waterproof
accessory or tapes to waterproof the cables. Otherwise the cables
might get wet or a short circuit occurs.

2.4.1 Install Network Cable Waterproof Jacket

Align
Install Waterproof Jacket
Figure 2-9
Steps:
1. Feed the network cable through ① and ③ in order.
2. Fix ② on the network cable between ① and ③.
3. Place ⑤ onto the end of ⑥, and plug the RJ45 male connector
into RJ45 female connector.
4. Screw ③ to ⑥ clockwise
5. Push ② into ③.
6. Secure ① with the ③ in clockwise direction.
19