Basic Settings; Overview Of Basic Settings - Bosch SMV4HTX01A User Manual

Basic settings

Basic settings
You can configure the appliance to meet your needs.
Basic settings

Overview of basic settings

The basic settings depend on the features of your appliance.
Basic setting
Rinse aid dispensing
Intensive drying
Hot water
InfoLight
1
Factory setting (may vary according to model)
Display text Selection
1
r05 r00 - r06
1
d00 d00 - d01
1
A00 A00 - A01
1
I01 I00 - I01
Basic settings aus
Description
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 25
Switch the rinse aid system off with
level r00.
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A01" or off
"A00".
Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the
floor below the appliance door. This
light will not be visible if the appli-
ance is installed at eye level with the
cabinet front fitted flush. If the appli-
ance door is not completely closed,
the spot of light will flash. The pro-
gramme has ended when the spot of
light is no longer visible on the floor.
Level "I00" switches InfoLightoff.
33