AEG HKH81700XB User Manual page 17

Problem
Two or more zones are de-
tected as one zone.
There is no pot indication on
the flexible zone.
Power Boost is not activating
for the pot on the flexible
zone.
Heat settings for the pots on
flexible zone are reduced.
comes on.
Pro Cook function deacti-
vates.
The display brightness is re-
duced.
The display does not react
to the touch.
The power level is reduced.
The arrow pointing down
comes on in the cooking
zone symbol.
Possible cause
The pots are too close to
each other and the cooking
zones were not set after
placing each pot.
The cookware is incorrect.
The diameter of the bottom
of the cookware is too small
for the zone.
There is already cookware
on the zone.
The pot is bigger than 240
mm. The maximum power is
reached.
You are using to many pots
with the highest heat setting
on the flexible zone. Power
management function is acti-
vated.
One of the Lock functions is
active.
You are using more than one
pot.
The temperature of the
zones is high. To ensure
long lifetime of the display
the brightness is reduced
depending on the tempera-
ture of the hob.
Part of the display is covered
or the pots are placed to
near to the display.
Power management function
operates.
ENGLISH
Remedy
For every pot set the zone
individually after placing the
pot on the cooking zone.
Use the correct cookware.
Refer to "Hints and tips"
chapter.
Use cookware with correct
dimensions.
Refer to "Technical informa-
tion" chapter.
Move the first pot slightly to
make room for the next one.
It is normal for this size of
pot. Use smaller pot or use
the highest heat setting for
the big one.
Move some pots to induc-
tion cooking zones.
To unlock the hob touch let-
ters in alphabetical order A -
O - X.
Use only one pot for the
function.
Let the hob cool down.
Remove the objects. Move
the pots away from the dis-
play.
Refer to "Daily use" chapter.
17