Asus ROG STRIX B450-I Manual page 28

6. Addressable RGB header (4-1 pin ADD_HEADER1)
This connector is for individually addressable RGB WS2812B LED strips with
embedded WS2811LED driver ICs.
ROG STRIX B450-I GAMING ADD header
The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/
Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs.
Before you install or remove any component, ensure that the ATX power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
•
•
•
•
1-14
E14337_ROG_STRIX_B450-I_GAMING_UM.indb 14
Actual lighting and color will vary with LED strip.
If your LED strip does not light up, check if the addressable RGB LED strip is
connected in the correct orientation, and the 5V connector is aligned with the 5V
header on the motherboard.
The addressable RGB LED strip will only light up under the operating system.
The addressable RGB LED strip is purchased separately.
Chapter 1: Product Introduction
2018-06-15 18:28:28