Advertisement
4. ASSEMBLY
4.1.
Fit handle
4.1.1.
Attach handle with 6mm x 12mm hex bolts, spring and
flat washers.
4.2.
Fit casters
WARNING! Two or more people are required to lay down or stand up the cabinet. DO NOT stand in front or behind and lock drawers
‰
whilst turning over.
4.2.1.
Carefully lay the cabinet upside down with a soft mat underneath for protection.
4.2.2.
Fit the two swivel/braked castors, on the handle side using 10mm x 25mm bolts, through each castor and into the bottom of the
cabinet. Tighten securely.
4.2.3.
Repeat for the two rigid casters on the other side.
For reference only.
Cabinet should be
turned upside down to
fit casters
4.3.
Drawers
4.3.1.
New drawers slides may be stiff and difficult to open at first. A gentle outward pull should release the safety catch that prevents the
drawer from opening whilst the cabinet is being moved.
4.3.2.
Remove drawers from their slides as below (pull left slide tab down and pull right side slide tab up).
5. MAINTENANCE
5.1.
To clean use a soft cloth that will not scratch the surface.
5.2.
DO NOT use solvents of any kind they may damage the surface.
5.3.
Liquid spills should be removed immediately, use a soft clean cloth to blot the spill gently - avoid rubbing.
5.4.
Grease the casters with good quality grease once a year.
5.5.
Lubricate the drawer slides twice a year with light duty oil.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
Original Language Version
01284 757500
01284 703534
AP7210SS | Issue 1 - 10/05/16
www.sealey.co.uk
Web
sales@sealey.co.uk
Advertisement
