Advertisement
Quick Links
Fountain Components
Image
Item Description
Zen Oval
Fountain Disc
Zen Oval
Fountain Basin
Fountain Information:
• This fountain holds approximately 1/2 gallon of water.
• A fountain cover is not available for this fountain.
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Component
Quantity
Item #
FT-260A
1
FT-260B
1
FT-260 Zen Oval Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK120-LV Pump with Transformer
#10 Stopper
2.5" length of PermaGum Putty
Approx. 6" length of 1/2" black
non-kink tubing
Approx. 1" length of 5/8" clear tubing
1" length of 1/2" CPVC pipe
Adhesive Dots
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
4
1
rev 3/30/2020
Advertisement
Related Manuals for Campania International Zen Oval FT-260
Summary of Contents for Campania International Zen Oval FT-260
- Page 1 FT-260 Zen Oval Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 1/2 gallon of water. • A fountain cover is not available for this fountain. • No refill device or submersible lights are suggested for this fountain. Pump Information: WP450LV - 120 GPH Low Voltage Pump (16 ft.
- Page 2 FT-260 Zen Oval Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be diffi cult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
- Page 3 FT-260 Zen Oval Fountain Assembly Instructions Step 5 - Firmly press the stopper into the hole while pulling the cord the remainder of the way. 5a - Use the handle of the screwdriver to press the stopper down as far as possible. See image “C”.
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.