Vivotek FE9380-HV User Manual page 211

7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile> 0 and capability_daynight_c<0~(n-1)>_ircutfilter=1)
n denotes the value of "capability_nvideoin"
NAME
mode
sir
<product dependent>
daymodebegintime
daymodeendtime
disableirled
enableextled
bwmode
sensitivity
VALUE SECURITY
(get/set)
auto, 6/6
day,
night,
di,
schedule
<product
dependent>
<boolean> 6/6
00:00~23:59 6/6
00:00~23:59 6/6
<boolean> 6/6
<boolean> 1/6
<boolean> 6/6
low, normal, high 6/6
(if
capability_daynight
_c<n>_ircutsensitiv
ity_type=options)
1~100 (if
capability_daynight
_c<n>_ircutsensitiv
ity_type=normalize
)
DESCRIPTION
Set IR cut control mode
Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_nvideoi
n"-1>_smartir" is 1
Day mode begin time
Day mod end time
Enable/disable built-in IR led
(capability_daynight_c<0~"capability_nvideoi
n"-1>_buildinir > 0)
Enable/disable external IR led
(capability_daynight_c<0~"capability_nvideoi
n"-1>externalir > 0)
Switch to B/W in night mode if enabled
Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<n>_ircutsensitivity_ty
pe=options
"1~100": if
capability_daynight_c<n>_ircutsensitivity_ty
pe=normalize
VIVOTEK
User's Manual - 211