Acer AL506 Manual page 9

ACER Monitor AL506
Notes
Adjust
Menu contents
Menu: 1
The On Screen Display disappears several seconds after you stop pressing the
buttons while performing an adjustment.
Any changes are automatically saved in the memory when the On Screen Display
disappears. Turning off the power should be avoided while using the Menu.
Adjustments for Clock, Phase and Position are saved for each signal timing. Except
for these adjustments, all other adjustments have only one setting which applies to
all signal timings.
Pressing [＋] , [－] or [Menu] buttons for the adjustment when the OSD is executed.
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the
screen is too bright.
Note: SWITCHING BRIGHTNESS /CONTRAST ADJUSTMENT:
To switch between Brightness and Contrast adjustments, press the Menu Button within 10
seconds after pressing the Brightness Button or the Contrast Button during the direct
adjustments above.
Brightness*1 (Direct)
Contrast (Direct)
Clock
Phase
H-Position
Return to Menu
V-Position