Installing The Antenna; Installing The Belt Clip - Kenwood TK-5320-K2 Instruction Manual

NX-300-K2, NX-300-K4, TK-5320-K2, TK-5320-K4
FCC ID: ALH378501
IC: 282D-378501

Installing the Antenna

Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and
turning it clockwise until secure.

Installing the Belt Clip

If necessary, attach the belt clip using the two supplied 3 x 6 mm screws.
Notes: If the belt clip is not installed, its mounting location may get hot during continuous transmission or when left sitting
in a hot environment.