Table of Contents
Advertisement
20
www.aeg.com
Problem
The loading
door does not
close
Not possible to
change the pro-
gram or option.
Not possible to
select an option.
Acoustic signal
is emitted.
No drum light
Unexpected du-
ration time on
the display.
Program inac-
tive.
Drying cycle too
short.
Possible cause
1)
The filter is not locked into posi-
tion.
Laundry is trapped between the
door and the seal.
After cycle start it is not possible to
change the program or option.
The option you tried to select is
not available for the selected pro-
gram.
Defective drum lamp.
The drying duration is calculated
according to load size and damp-
ness.
The water container is full.
Load size is small.
The laundry is too dry.
Remedy
Put the filter in the correct posi-
tion.
Remove trapped items and close
the door.
Turn the tumble dryer off and on.
Change the program or option as
required.
Turn the tumble dryer off and on.
Change the program or option as
required.
Contact the service centre to re-
place the drum lamp.
This is automated — the appliance
is working correctly.
Drain the water container, push
the Inicio/Pausa button.
Select time program. The time val-
ue must be related to the load. To
dry 1 item or a small amount of
laundry we recommend short dry-
ing times.
Select time program or higher dry-
extra seco )
ness level (e.g.
3)
Advertisement
Table of Contents
