Campania International Estancia FT-155 Assembly Instructions

Fountain Components
Image Item Description
Estancia
Fountain -
Water Feature
Estancia
Fountain -
Pump House
Estancia
Fountain - Basin
Fountain Information:
• Three people are recommended for the installation of this fountain!
• This fountain holds approximately 20 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kist
• No stoppers are required to use the refill kit or LED kit for this fountain.
Pump Information:
OEMPF525 - 525 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-155A 1
FT-155B 1
FT-155C 1
FT-155 Estancia Wall Fountain
Assembly Instructions
Pump Kit Parts List
Image
(use adapter indicated)
1/2" x 1/2" x 1/2" T Connector
(tubing will be pre-assembled)
Approx. 6" length of 1/2" black
(bottom of T Connector)
Approx. 8" length of 1/2" non-kink
Approx. 2" length of 5/8" clear tubing
26" length of 3/8" i.d. galvanized steel
Proudly
MADE IN USA
Component
PK500 Pump
#7 Drain Stopper
non-kink tubing
tubing
2" CPVC Pipe
pipe
Wedges
Hose Clamp
Quantity
1
1
1
1
2
2
2
2
2
1
rev 3/30/2020