Safety Talk - Omega OME 412 Installation Manual And Owner's Manual

Congratulations on your purchase of an
OMEGA OME412 Gas Tankless Water
Heater.
You're about to discover that not all water
heaters are created equal. The Omega
Comfort has made possible the design and
production of this efficient and incredibly
affordable Tankless water heater that will
provide you with many years of uninterrupted
service. It is the mission and goal of the
Omega Comfort to continue to combine
innovation, quality, affordability and
reliability in all of its Tankless water heaters.
Once again, thank you and congratulations.
Before going any further, check and make
sure that the following items accompany
your water heater. There are two plastic
pouches in the Styrofoam packaging that
contain necessary hardware.
Before we go any further let's make a
inventory:
The first pouch will hold the two knobs for
the unit.
They are the same so no designation is
necessary.
* Mounting brackets and bolts available on
request only.
- four bolts for hanging the unit
The second will hold:
- The Energy consumer guide
-The lather from the president
-This installation and instruction manual
-Warranty statement
-The business opportunity proposal
-The Discount tickets.
-They are also 2 mounting brackets taped on
the back of the unit.

Safety Talk

1. Always follow all local codes, or in
absence of local codes, follow the
actual edition of National Fuel Gas
Code, ANSI Z223.1/NFPA 54 in USA or
Installation Codes for Gas Burning
Appliances in Canada, the CGA
standard, CAN/CGA B149.1 or
CAN/CGA B 149.2
2. Check the rating plate for the correct
gas type, gas pressure, water
pressure, and electrical rating. DO
NOT INSTALL the unit if any of those
characteristics can't be met.
3. If during unpacking, you observe any
damages on the cabinet, flue parts or
electrical cable of the water heater,
STOP UNPACKING!
DO NOT INSTAL until you notified
the factory and the unit is properly
inspected. Always follow the factory
technician suggestions.
4. Properly ground the unit in accordance
with local codes and in absence of
those with the National Electrical
Codes, ANSI/ NFPA 70 in the USA
or Canada Electrical Code Part 1 in
Canada.
5. If any problem arrives turn of the gas
first from the valve and then the cold
water supply. Call a trained technician,
the Gas Company or our telephone
hotline at (888)866-2118 for
instructions.
6. Use caution in planning you
installation. For maximum efficiency it
should be installed at equal distance
from all consumers, easy to access,
shortest distance from the venting
3