Factory Settings For Orbi Satellites - NETGEAR RBR850 User Manual

Table 7. Factory default settings for model RBR840 (Continued)
Feature
Outbound (communications going
out to the Internet)
Source MAC filtering
WiFi
WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel 2.4 GHz fronthaul
RF channel 2.4 GHz backhaul
RF channel 5 GHz fronthaul
RF channel 5 GHz backhaul

Factory settings for Orbi satellites

You can return your Orbi satellite to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the Orbi satellite for
at least seven seconds. The Orbi satellite resets, and returns to the factory settings.
Supplemental Information
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Default Setting
Enabled (all)
Disabled
Enabled
See router label
WPA2-PSK (AES)
Enabled
Auto
Note: Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data
throughput rate.
United States of America; otherwise, varies by region
Auto
Auto
NA and PR: Channel 48
WW and JP: Channel 36
NA and PR: Channel 157
WW and JP: Channel 108
132 User Manual