Advertisement
UNiKA
User Manual
PRO MMD
GENERAL PRECAUTION BEFORE USE
Thank you for purchasing the UNiKA PRO SERIES AUDIO INTERFACE. Before using,
please read this manual carefully and pay attention to every detail that you must pay
attention to. If you use a mixer to connect to this interface, please turn off the mixer
power and +48V phantom power before connecting, and then turn on the power and
phantom power in turn after inserting the signal cables. For passive models, please do
not turn on the phantom power to avoid leakage or damage the equipment.
If using a model with a volume knob, turn the volume knob to the minimum. During
use, please do not plug or unplug the wires arbitrarily to avoid signal loss. Please
refer to the following instructions for the soldering method of the plugs to ensure the
expected level and keep the signal smooth.
If you need further installation or operation guidance, please directly contact UNiKA's
dealer or distributor, or write to the following mail address for help:
info@unikapro.com
PRODUCT OVERVIEW
PRO MMD is a dedicated DI box for passive multimedia, without the need to install
battery or provide phantom power.
TM
PRO MMD has a pair of built-in UNiKA-PRO
EI30A10E 1+1:1+1 isolation
transformers which has a special copper foil layer and a dedicated ground layer, which
allows this device to restore high signal/noise ratio and dynamic sound, and can avoid
unnecessary leakage caused by radio frequency interference, ground interference and
potential difference.
PRO MMD is particularly suitable for play deck, computer, and video equipment.
It converts high-impedance signals into low-impedance balance signals which is
convenient for extending the wiring distance and blocking interference.
The input end of PRO MMD adopts two TRS sockets, a pair of RAC sockets and a
mini TRS socket, any one socket can be used as input or through out. In addition, it
is equipped with a 0/-20dB attenuation switch, which is suitable for various types of
audio signals with high and low impedance. The output terminal is also equipped with
a ground/floating button, in order to quickly eliminate ground noise.
1
Advertisement
