Optional Accessories; Installation - Tripp Lite B203-101-IND Owner's Manual

1-port industrial usb 2.0 over cat5/cat6 extender kit with metal case and esd protection

Hide thumbs Also See for B203-101-IND:

Table of Contents

Optional Accessories

• N202-Series Cat6 Snagless Patch Cables

• U022-Series USB 2.0 Cables

• UR022-Series Reversible USB 2.0 Cables

• U030-Series USB 2.0 5-Pin Mini-B Cables

• UR030-Series Reversible USB 2.0 5-Pin Mini-B Cables

• U050-Series USB 2.0 Micro-B Cables

• UR050-Series Reversible USB 3.0 Micro-B Cables

Note: Test to make sure that the entire installation works properly before

pulling cables through ceilings or walls.

1. Connect the transmitter unit to an available USB port on your

computer with a USB 2.0 cable.

2. Connect the RJ-45 ports on the transmitter and receiver units

with Cat5e/Cat6 cable.

Note: The distance between the transmitter and receiver units must

not exceed 150 ft. (45 m).

3. Connect a USB 2.0 device to each available port on the

receiver unit.

4. (Optional) If connecting power-hungry device(s), use the

Phoenix connector on the receiver to add external power (9V

to 36V).

-05-109-933C76-EN.indd 3

5/19/2020 11:28:42 A

Table of Contents