Advertisement
UNPACKING
Unpack the electric fryer immediately after receipt. If the machine is found to be damaged, save the packaging
material and contact the carrier within fifteen (15) days of delivery. Immediately contact service or your local
dealer of the equipment. You have no recourse to damage after fifteen (15) days.
TO AVOID SERIOUS PERSONAL INJURY:
ALWAYS install equipment in a work area with adequate light and space.
•
ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards.
•
NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create
•
hazards and will void warranty.
NEVER operate the electric fryer without all warnings attached to it.
•
NOTICE: Local codes regarding installation vary greatly by area. The National Fire Protection Association, Inc,
states in its NFPA 96 latest edition (see below) that local codes are "authority having jurisdiction" when it comes to
requirements for installation of equipment. Therefore, installations should comply with all local codes. Once your
electric fryer has been removed from the packaging, be certain that all protective plastics and residues are
removed from all surfaces.
PROPER GROUNDING
THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH THIS
PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER
GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 5-1
and Fig. 5-2).
1. Complete the warranty card and place it in the mail.
2. Electric fryer outside covering/containment unit, oils and baskets will be HOT during and after use. Use
caution when approaching the unit.
Electrical
Model CPF10
The CPF10 -120V Fryer is wired to use with a standard 120VAC receptacle and may be plugged in any convenient
outlet. This unit requires 14.2 amps to produce 1700 watts and should be used on a dedicated circuit.
Models CPF16 & CPF32
The CPF16E & CPF32E -208/240V Fryers. The CPF16 requires 15.8A to produce 2900W-3800W and should
be on a dedicated service. The CPF32 requires 31.6A to produce 5800W-7600W and should be on a dedicated
service.
Installation
Fig. 5-1 Correct
Fig. 5-2 Incorrect
Page 5
Advertisement
