Removing the LCD Assembly
IMPORTANT
If the LCD touchscreen panel becomes defective, the LCD panel with the touchscreen film
and the touchscreen control board should be replace. Return all three components for RMA.
1.
Remove the front bezel by following the procedure described on the page 28, then disconnect the
disconnect the webcam cable from the webcam module.
2.
Remove the screws securing the LCD assembly to the rear cover.
Quantity
6
3.
Detach the LCD assembly from the rear cover and turn it over to access the LCD panel cables.
30
Color
Torque
Black
4.0 +/- 0.3 kgf.cm
Part Number
86.ZA324.8R0
Veriton Z290G AIO Computer Service Guide