Table of Contents
Advertisement
Using ControlSync function with multi screen configuration
To control a sub monitor from the master monitor, the control keys on the master monitor is used.
Please install the master monitor at an accessible place.
Mounting multi screen configuration
When monitors are used in a multi-screen configuration for a longer time, slight expansion of the displays may happen due to
temperature changes. Due to this, it is recommended that over one millimeter gap is kept between adjacent display edges.
[Cable connection example]
H MONITOR 3
V MONITOR 3
Computer
If monitors are connected with ControlSync cables, please make sure the monitor, which is connected to the computer, is the
master monitor.
If you turn off one of the monitors in a multi-screen configuration with DisplayPort daisy-chain, the picture on monitors connected
to that monitor will turn off.
To display the monitors, please turn on the monitor, which you turn off.
When you set one image to be displayed with TILE MATRIX ENABLE, please set the monitor number by referring MONITOR
NO. (see
page
21). You can assign numbers to the monitors in any order. The monitor numbers do not need to follow the order in
which the cables are connected.
Master
DisplayPort IN
DisplayPort OUT
ControlSync OUT
ControlSync IN
English-32
DisplayPort Cable
ControlSync Cable
Advertisement
Table of Contents
