Removing The Pci And Agp Expansion Cards; Removing The Audio Board - Acer Veriton 9100 Service Manual

Removing the PCI and AGP Expansion Cards

1. Remove the screw on the bracket of the expansion card. Set the screw aside, you will need it when
replacing the expansion card.
2. Gently pull out the expansion card to remove it from the expansion slot.
.
NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP
devices.

Removing the Audio Board

1. Disconnect the audio cable and the USB cable from the audio board.
2. Remove the 2 screws that hold the audio board, then remove it from the housing.
51 Chapter 3