Advertisement
Main Features
> Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
> Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera's AES speed can reach 1/100,000s.
>
OSD button shortcut functions
CVBS MODE: hold left key 5s.
AHD MODE : hold right key 5s.
System switching : hold down key 5s.
> OSD MENU
LENS
MANUAL/DC
AUTO,1/30,1/60,FLK,1/240,1/480,1/1000,
SHUTTER
1/2000,1/5000,1/10000,1/50000,X2,X4,X6,X8
,X10,X15,X20,X25,X30
AGC
EXPOSURE
SENS-UP
AUTO(X2-X30)/OFF
BRIGHT-
NESS
D-WDR
DEFOG
OFF
BLC:LEVEL/AREA /DEFAULT
BACK LIGHT
HSBLC:SELECT AREA/DISPLAY/BLACK MASK/LEVEL/
MODE/DEFAULT
WHITE BAL.
ATW/AWC→SET/INDOOR/OUTDOOR/MANUAL/AWB
EXT
D→N(DELAY)/N→D(DELAY)
D→N(AGC)/D→N(DELAY)
AUTO
DAY &
/N→D(AGC)/N→D(DELAY)
NIGHT
COLOR
MAIN
B/W
BURST/IR SMART/IR PWM
MENU
2DNR
OFF/LOW/MIDDLE/HIGH
NR
3DNR
OFF/LOW/MIDDLE/HIGH
CAM TITLE
D-EFFECT
FREEZE/MIRROR/NEG.IMAGE
SELECT AREA1-4/DISPALY/SENSITIVITY
MOTION
/COLOR/TRANS/ALARM/DEFAULT
PRIVACY
ENG/CHN1/CHN2/GER/FRA/ITA
LANGUAGE
/SPA/POL/RUS/POR/NED/TUR
SPECIAL
DEFECT
WHITE DPC
BLACK DPC
CAM ID:0-255
RS485
BAUDRATE:2400/4800/9600/19200/38400
SHARPNESS
MONITOR
ADJUST
LSC
VIDEO.OUT
Device connection
0－15
0-100
Safety instruction
OFF/ON
OFF/AUTO
1.Before using the camera ,please read this manual carefully and
keep it safely for later use.
2.Installation should be proceed by professional service and follow
manufacturer's instructions, do not dismantle without authoriza
tion.
3.In order to prevent sensor ,do not expose lens to intense light
source in long time.
4.Do not touch sensor directly. Please covers the dustproof cover
when the camera is not being used.
5.Please use a dry soft cloth to clean the camera. If dirt difficult to
OFF/ON
clean, use detergent with water and wipe dry the camera.
6.Do not install camera under air conditioning's air gate ,or else
lens blur with condensation of moisture.
OFF/ON
7.Please ensure that all electric power sources are turned off
when not open , installation ,clean, etc operation.
LIVE DPC
8.Please transporting , using and storing the camera in allowable
temperature and humidity.
9.If the camera was broken, for example power cord or plug dam-
ID DISPLAY
aged,Splash liquid or foreign matter fall into camera, raining,
wetting, etc can't work situation, please contact manufacturer
AUTO/OFF
LCD/CRT
or maintenance center (modify and maintenance without perm
OFF/ON
ission, you must be responsible for the problems).
PAL/NTSC
Common Problems and Troubleshooting
> No Picture after providing power
May be the power supply voltage abnormity, please check
he power supply voltage and pole whether exactitude.
Please check all the connecting cable and monitors whether
be connected correctly or not.
> The picture level direction have flowing interference
ripples
May be caused by the power supply AC ripples, it need filter
the wave of the power supply.
Check the monitor and peripheral equipments used.
> The picture background color changes continuously
The fluorescent lamp's electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.
> The picture smear too mass
The power supply's voltage unstable.
Connecting cables not connect correctly or have high
impedance.
Note:
• Power supply must pass safety certification ,Its output
voltage, current, voltage polarity and operating temper-
ature must match requirement of this equipment.
• Please install lightning protection devices or cut off the
power in thunder and lightning conditions.
• To capture high-quality video and pictures, please make
sure the network connection is stable and smooth.
• Please note the camera's operating temperature and its
using environment requirement. Avoid using the camera
at too high or too low temperatures. The operating tem-
perature is -30~+60℃. (Recommendatory operating tem-
perature is -10~+50℃.)
• Do not mount the camera near by the radiator or heater.
Advertisement
