Table of Contents
Advertisement
5 Wall mount
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
> 25mm
For information about how to wall mount your
SoundBar, see the quick start guide.
8
EN
3 - 3.5mm
6 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
•
Total output power: 40W RMS (+/- 0.5 dB,
10% THD)
•
Frequency response: 20 Hz-20 kHz / ±3 dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
• AUX: 650 mV
• AUDIO-IN: 400 mV
Audio
•
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Main unit
•
Power supply: 220-240 V~, 50 Hz
•
Power consumption: 40 W
•
Standby power consumption: ≤ 0.5 W
•
Speaker impedance: 8 ohm (full range)
•
Speaker drivers: 4 x 54.5 mm (2")
•
Dimensions (W x H x D):
845 x 74.5 x 94 mm
•
Weight: 2.0 kg
Remote control batteries
•
1 x CR2025
Advertisement
Table of Contents
