1. Manuals
  2. Brands
  3. GIGA Manuals
  4. Switch
  5. Copper Networks G4200-4T
  6. Quick start manual

GIGA Copper Networks G4200-4T Quick Start Manual

Twisted pair switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
G4200-4/8T Twisted Pair Switch
Quick Start Guide
GIGA Copper Networks GmbH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Copper Networks G4200-4T and is the answer not in the manual?

Questions and answers

Related Manuals for GIGA Copper Networks G4200-4T

Summary of Contents for GIGA Copper Networks G4200-4T

  • Page 1 G4200-4/8T Twisted Pair Switch Quick Start Guide GIGA Copper Networks GmbH...
  • Page 2 1. Hardware Descriptions Panel information: The front panel is shown as below: Ethernet port (2*GE/10GE SFP/SFP+) (1*10/100/1000BaseT RJ45) The following table shows the port descriptions. Label Description Console port with RJ45 connector for connection to a computer for console control /administration. Console port The Console port can be used for accessing the OnAccess4200 CLI (command line interface) for out-of-band management.
  • Page 3 The corresponding port connection normal Green The link condition is poor or there is no G.hn1 connection to this port G.hn2 The corresponding port connection abnormal G.hn link status G.hn3 and link quality is poor G.hn4 Yellow The link condition is normal or there is no connection to this port The corresponding port connection normal XG1/XG2 10G Ethernet link...
  • Page 4 3. Application Diagram and installation instruction 3.1 Application 3.2 Sync Installation If there is only one G4200-4/8T, you needn’t use SYNC port. But if there is more than one G4200-4/8T, just only one is the primary and the rest NOTE are secondary.
  • Page 5 4. Set up 5. G.hn Cable and Connectors Device Supported connectors Supported MIMO RJ45 8P8C RJ11 6P6C RJ11 6P4C Phone Line MDU RJ11 4P4C RJ11 4P2C RJ11 6P6C RJ11 6P4C RJ11 4P4C Phone Line CPE RJ11 4P2C...
  • Page 6 2 Pairs Cable Application MDU needs to be configured as MIMO mode. Single Pair Cable Application MDU needs to be configured as SISO mode.
  • Page 7 6. Login 6.1 Default Configuration: Default IP Address IP Address: 192.168.0.252 IP Sub network: 255.255.255.0 Accounts: User name: superuser Password: 6.2 Login to web management page You can browse http://192.168.0.252 and type user name and password 7. Configure IP You can configure IP Address from “VLAN Management >> VLAN Interface” of left menu...

This manual is also suitable for:

Copper networks g4200-8t

Table of Contents